TowerMaze Level 26
Print Profile(4)
Description
Membership
If you like my designs and want to sell physical versions of them consider becoming a member for just 10$ a month! It shows support and let's me to offer more designs! Anyways, enjoy the designs!
Larger than ever!
To make the further TowerMaze levels more complex and fun, it was time to make it larger! It will take some time to print, however, I have made sure that the case for TowerMaze level 26 will work with all the TowerMaze levels up to level 45. That way you will be able to cut print time and material use in half as you will need only 1 case for all the further levels up to level 45. You can, of course, print a case for every level you print to make a nice collection, I just wanted to make it optional.
LEVEL 36 AVAILABLE FOR FREE TO DOWNLOAD ON THANGS PAGE - IF YOU PRINT IT, MAKE SURE TO ADD A PHOTO TO THE DESIGN PAGE AS LEVELS 41 - 45 ALL WILL BE UPLOADED AND AVAILABLE FOR FREE IF 100 “MAKES” ARE ADDED ON THANGS DESIGN PAGE OF LEVEL 36!
GET LEVEL 36 FREE HERE: https://than.gs/m/1116421
As the previous 10 levels, TowerMaze level 26 has built-in one-way closing path that lets you to reset the maze without having a need to solve it in reverse.
TowerMaze level 1 up to level 25 available on my profile.
TowerMaze level 27 - level 40 available on Thangs page
Dimensions and print specifications for TowerMaze level 26:
Dimensions for the maze: Height = 17.9 cm (7.05 Inches) | Diameter of 7.9 cm (3.11 inches)
Dimensions for the case: Height = 16.7 cm (6.58 Inches) | Diameter of 8.1 cm (3.19 inches)
Print time for TowerMaze level 26: 4 hours and 3 minutes
Material used for TowerMaze level 26: 39 meters / 116.30 grams
Print time for case for TowerMaze level 26: 4 hours and 47 minutes
Material used for case for TowerMaze level 26: 49.11 meters / 146.50 grams
Printing at the same time:
Total print time for TowerMaze level 26 + case: 8 Hours and 44 minutes
Total material used for TowerMaze level 26 and case: 88.10 meters / 262.70 grams
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Other levels are available here:
Boost Me (for free)
If you are interested in more levels, consider boosting any of these levels as that shows your appreciation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (43)