Sifting Tower with Filters
Print Profile(4)
Description
Sifting tower for separating different sizes of crushed stone. I use this for getting the right size material for making custom rings. I found that printing this with PETG at .16 mm layer height with slower settings (I used the .16 mm optimal preset in bambu studio) gave me the best results. The filters need to be printed without top or bottom shells so that the inlay pattern is exposed and creates a filter like surface. I recommend that the filters be printed at .2 layer height for the most accurate print.
Approximate hole sizes for the filters (largest to smallest):
20% - 3.5 mm
25% - 2 mm
30% - 1.5 mm
40% - 1 mm
50% - 500 um
60% - 400 um
70% - 300 um
The 70% (300 micron) is not included directly in the print profiles and will need the infill % changed manually in the slicer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (33)