Wall / Desk Clock concrete

You can sell this model if you have the license for it. You can find it on my Patreon.
www.patreon.com/cP_3D

I constructed a clock from a Hueforge with a concrete texture. I have to say that I am fascinated by the result. The texture turned out beautifully. I hope I can make someone happy with it.

I could imagine that this watch would also be a very great gift for someone.

I created a version with 170 mm for the Wall/table and one for the Wall with 245 mm

Here you will only find the dials!

You can find the necessary accessories under the following links:

You can find suitable clock hands here:
https://makerworld.com/en/models/603977#profileId-526590

You can find the colored back panel and further wall bracket for the 245 mm version here:
https://makerworld.com/en/models/603993#profileId-526611

You can find the colored back and the table stand for the 170 mm version here:
https://makerworld.com/en/models/600983#profileId-523239

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.

Start with Black
At layer #12 (1.12mm) swap to dark Grey
At layer #17 (1.52mm) swap to grey
At layer #23 (2.00mm) swap to White for the rest.

If you get the message with the floating regions when slicing... you can ignore this

Here you can find my other dials collected
https://makerworld.com/en/collections/1715414