Search models, users, collections, and posts

Oil film remover/Skimmer/Outflow oil film remover/Skimmer

IP Report

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini
H2D
H2D Pro
H2S
P2S
H2C
X2D
A2L

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.8 h
1 plate
4.1(8)

Open in Bambu Studio
Boost
65
171
11
4
206
55
Released 

Description

Content has been automatically translated.
Show original

Venturi tube principle to remove the oil film on the water surface, prevent suction fish suction shrimp suction grass, the effect is very good.
Adjustable, you can scale it yourself, or build one that suits you, let me introduce you.
As far as possible, the other end of the original water oil removal film mouth is sealed to avoid suction into the biological filter.
There are a lot of aquarium related designs waiting for me to upload slowly...

 

Venturi tube principle to remove the oil film on the water surface, prevent suction fish suction shrimp suction grass, the effect is very good.
Adjustable, you can scale it yourself, or build one that suits you, I'll give you a brief introduction.
As far as possible, seal the other end of the original water oil removal film mouth to avoid suction into the biological filter.
There are many aquarium-related designs waiting for me to upload slowly...

Comment & Rating (11)

(0/1000)

Print Profile
0.2mm layer, 2 walls, 15% infill
Printed Great.
profile
2
Reply
Boosted
Works better than the store bought one I have.
designer
1
Reply
What hose size is it compatible with
The designer has replied
Show original
0
Reply
The outer diameter of the model joint is 18mm. The design should be in accordance with 16mm hose design. The 16mm bore hose I believe is often used by senior aquarists. But mine was built into a metal inlet pipe.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Strength Issue:could not make it work. I tried 5 times and I had always problems as the printed parts are very fragile. I printed in PETG.
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.