Bambu P1 Lubricant Oil Nozzle by MingGY

MingGY

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.12mm layer, 2 walls, 15% infill

Designer

24 min

1 plate

4.9(105)

Open in Bambu Studio

Boost

1807

3616

117

1.9 k

1.2 k

Released

Description

This is a lubricant nozzle specifically designed for Bambu P1, aiming to make the maintenance of Bambu printers easier and more convenient.

Simply install this nozzle on the Bambu lubricant tube, and you can extremely conveniently lubricate the lead screws of the Bambu printer. In daily use, proper lubrication of the lead screws is crucial for the stable operation and printing accuracy of the printer, and this nozzle exactly solves the trouble of inconvenient lubricant application.

I recommend adding the model to your favorites. When you need to maintain your 3D printer, you can quickly print this.

One user left a message to remind that for the lead screws, you need to use lubricant grease with a higher viscosity. After checking the wiki materials, I confirmed that what he said was also correct. Therefore, I'm going to quote the description of lead screw maintenance from the wiki here:

You can use the BX-300/F series grease in the link, but other lubrication alternatives can be used. A popular lubricant is Super Lube 92003 Silicone Lubricating Grease with PTFE or Lucas Oil 10533 White Lithium Grease which should work similarly.

Bambu Lab P1 系列打印机维护建议 |Bambu Lab 维基

Bill of Materials

Maker’s Supply Kits and Parts

润滑油 - FAZ031

FAZ031

5.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (117)

@cacklersipod

I do want to warn people this is not the correct procedure for your printer. You are not supposed to use the lightweight oil on your lead screw. It the lead screws you need to use the heavier weight grease.

The designer has replied

@user_2097296336

you don't need to use the heavy weight grease. you can use the normal one, you just need to use more of it and at a greater frequency

@user_2872511008

I believe I read in the description that oil can also be used because it reduces dust and dirt adhesion

Show original

@nickzlegend

https://wiki.bambulab.com/en/a1/maintenance/basic-maintenance

@Gazzatommy

Print Profile

0.12mm layer, 2 walls, 15% infill

great work had to add a brim to the bottom as didnt like to finish the print at the top

@Pums

Print Profile

0.12mm layer, 2 walls, 15% infill

Very Fast Print.

@Squilibryo

Print Profile

0.12mm layer, 2 walls, 15% infill

Very helpful, thank you

Show original

@IdeaWorks

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

great

@rcmarcel77

Print Profile

0.12mm layer, 2 walls, 15% infill

Nice work. thx

@th_eo_ry

Print Profile

0.12mm layer, 2 walls, 15% infill

thanks!

@technokoks

Boosted

Print Profile

0.12mm layer, 2 walls, 15% infill

Printed perfectly, ideal for maintaining the rods

Show original

@user_1162743339

Print Profile

0.12mm layer, 2 walls, 15% infill

printed out good in TPU

@Paschy83

Print Profile

0.12mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License