Sea Turtle V3 (hueforge)
Print Profile(1)
Description
Sea Turtle Ver. 1 Wall Art. (hueforge) This is a 7 color Print.
See Printing instructions below.
you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.
Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount
Printing Instructions:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm
The Model is 200x133.3mm in size
Filaments Used:
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ Sunlu Yellow Transmission Distance: 10
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Green Transmission Distance: 10
This print uses 6 unique filaments and uses a couple of them a few times.
Swap Instructions:
Start with Black
At layer #17 (0.88mm) swap to Blue
At layer #21 (1.04mm) swap to Green
At layer #22 (1.086mm) swap to Orange
At layer #23 (1.12mm) swap to White
At layer #29 (1.36mm) swap to Black
At layer #38 (1.72mm) swap to Blue
At layer #42 (1.88mm) swap to Green
At layer #51 (2.24mm) swap to Orange
At layer #55 (2.40mm) swap to Yellow
At layer #57 (2.48mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)