Swinging Y Splitter for Bambulab P1P's Pegboard
Copyright Claim
Swinging Y Splitter for Bambulab P1P's Pegboard
Boost
35
57
32
Print Profile(6)
0.2mm layer adaptive layers, All pieces
Designer
1.3 h
1 plate
0,08 mm - Y Splitter Only
Designer
47 min
1 plate
For calibrated filaments only - All pieces
Designer
1.4 h
1 plate
0.2 mm - Pegboard Mount Only
Designer
28 min
1 plate
Click to see more
Open in Bambu Studio
Boost
35
57
32
0
467
154
Released
Description
This splitter allows you to insert the printing filament from two different inlets.
Useful for those who own AMS and also for those who use a dry box.
The pin in the center allows the splitter to swing and follow the movement of the print head, making the movements smoother.
For assembly, 3 PC4-M10 connectors and a spot of glue are required.
Alternatively, instead of glue, you can assemble the pin with the base using a self-tapping screw.
If you like my work and you want to support me to do better, you can buy me a coffe at the following links
https://buymeacoffee.com/GSprint
Comment & Rating (32)
All
Print Profile
0,2 mm Adaptive layers - Y Splitter Only
Good work. For a long time I looked for a suitable one for my available threads and I found it. Thank you
1
Reply
Print Profile
0.2mm layer adaptive layers, All pieces
perfect
1
Reply
Print Profile
0.2mm layer adaptive layers, All pieces
Print in place with heated PETG all fine.
(Edited)The designer has replied
0
Reply
Did you calibrate the filament first?
I have print it with calibrated Bambulab PLA Matte and it works very well.
(Edited)1
Reply
I've made a new profile with a bigger hole for non calibrated filaments if you want retry
(Edited)1
Reply
btw, I have reprinted the same file that gives you problems to check the issue and correct it, but mine works very well (this is a not calibrated filament)
(Edited)
1
Reply
filament did not fit x1c
The designer has replied
0
Reply
What?
0
Reply
Replying to @Gabb.99
holes were too small filament would not fit through.
0
Reply
Replying to @Jigsawscreation
This is a problem caused by non-calibrated or wet filaments,
You can find the larger holes version in the print profile list (made for non-calibrated filaments)
0
Reply
Print Profile
0.2mm layer adaptive layers, All pieces
didn't really work for me not smooth.
The designer has replied
1
Reply
I'm sorry to see that, but I've made a larger fit version to who don't use calibrated filaments,
Just check the print profiles
0
Reply
Print Profile
0,2 mm Adaptive layers - Y Splitter Only
das filament passt nichtmal durch die löcher
The designer has replied
1
Reply
I'm sorry to see that, but this is an issue that only who print non-calibrated filaments have.
For who don't calibrate filaments, I've made a larger-fit version some months ago.
Just check the print profiles
0
Reply
Print Profile
For calibrated filaments only - All pieces
Very useful for our temporary setup, Although holes were a little tight and had to compensate hole contour to fix. Overall great model and helped us
1
Reply
Print Profile
0.2mm layer adaptive layers, All pieces
works great, no problems with ams filament changes.
1
Reply
Print Profile
0.2mm layer adaptive layers, All pieces
Works great :)
1
Reply
Print Profile
0,08 mm - Y Splitter Only
Nice, works and looks good
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld