Spool inner spacer for reusable spools - Free 3D Print Model

Search models, users, collections, and posts

thumbprint

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 30% infill

Designer

1.3 h

1 plate

4.9(28)

Open in Bambu Studio

Boost

205

149

Released

Description

Inner spool spacer for Bambu Lab reusable spools, allows for winding 3rd party filament or rewinding Bambu officual filament. This similar to the cardboard inner tube used in filament refills. Contains the guide notch found on the reusable spools and two filament starting holes.

spool

spool adapter

Comment & Rating (29)

@Ssadab

Print Profile

0.2mm layer, 2 walls, 30% infill

(Rewriting review because the star ratings worked this time) Works but only complaint is the filament retaining holes are kinda useless currently cause they are such a sharp angle putting a 90 degree stress point in the end off the filament.

(Edited)

@navycow

Print Profile

0.2mm layer, 2 walls, 30% infill

like a dummy I threw away the cardboard ones. these came in clutch. also fits on the print your own spools

@Tranimal

Print Profile

0.2mm layer, 2 walls, 30% infill

Works perfect. Thanks

@billstearns

Print Profile

0.2mm layer, 2 walls, 30% infill

This is great with ONE flaw. The hole for the filament is TOO SMALL. I have to drill a bigger hole.

The profile uploader has replied

@thumbprint

Thank you for the feedback. Currently it has 2mm diameter holes, but I can have look at uploading an additional file with slightly larger holes. What size drill bit did you have to use?