The Catalyst

cover

IMG_2677.jpg

IMG_2678.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

plate_13.png

plate_14.png

plate_15.png

plate_16.png

plate_17.png

plate_18.png

plate_19.png

plate_20.png

plate_21.png

plate_22.png

2024-07-27_198bfdb5d50d9.jpg

<ul><li>UPDATED with correct support settings.</li><li>can be printed on A1 mini</li><li>430 grams of the white filament</li><li>410 of the light green filament</li><li>360 grams of the dark green filament</li><li>110 of the orange filament</li><li>1310 g of filament all together</li><li>total print time 2d1h13m, I printed all parts over 5 days.</li><li>brim enabled for all parts.</li></ul>

22 plates, 2d1h13m, 1310g

Matching Black Stock Pieces Multi-Color

Black with multi-color at similar heights

Black Parts

Orange Parts

Orange with White at Higher Layer

White  Parts

White Parts - Flat-ish

White Part - Tall

zac.mackey

Slabiimov_SillybuttsSLAB_2.JPEG

Slabiimov_SillybuttsSLAB.JPEG

This profile optimizes the layout for both color printing, and for larger print beds of the X1C and P1S.I HIGHLY recommend you have your adhesion dialed in and a clean print bed for this. I use a SuperTack plate on all my machines when printing these and it works incredibly well and results in a nice, even, smooth finish. The plates are pretty full, so if you have spots that don&#39;t have good adhesion, you will likely have issues. &nbsp;The model I&#39;ve included pictures of was created using this exact 3MF. &nbsp;Print each plate (8 of them) and then use a hardware kit from a supplier (I bought mine from Out of Darts) and follow their assembly video. Since this is a remix of the original SLAB, some parts are different, but it should be fairly obvious when you are assembling it by following their video of the base version. &nbsp;Reach out if you have any questions, happy to help troubleshoot any issues or provide guidance as I&#39;m able.

Slabiimov - X1C & P1S - 8 Plates - Optimized AMS Config

SLAB - Silly's Lever Action Blaster (Nerf Homemade)

Slabiimov Cosmetic Components

This file contains all of the parts ready to be printed on a bambu printer. I have configured all of the parts with the proper settings, and have built the blaster using these prints! This was printed on the A1 mini in 22 prints. If you have the larger printers, you could easily move things around to reduce this number. This is the slabiimov version. The colors can be changed to see potential color options as well. The original files are designed by Sillybutts, and the slabiimov components are compiled by EpictheHamster. The only extra parts I needed were the 10 M3 12mm screws, as I had enough extra screws included with my SLAB kit from Outofdarts.

Slabiimov/SLAB Bambu Studio Files

ASIA

Print Profile(2)

Description

Comment & Rating (62)

This remix is based on

License

Related Models