Egg Dispenser by ljhtom
Remixed by
Copyright Claim
Egg Dispenser by ljhtom
Remixed by
Boost
356
635
132
Print Profile(4)
0.2mm layer, 2 walls, 10% infill
Designer
7.1 h
2 plates
ABS 0.2mm layer, 2 walls, 10% infill speed 50%
7.1 h
1 plate
0.2mm layer, 2 walls, 10% infill
9.5 h
3 plates
0.24mm layer, 2 walls, 10% infill
7.1 h
1 plate
Boost
356
635
132
10
1.3 k
1.1 k
Released
Description
Egg Dispenser by Ljhtom, BambuStudio -Ready!
-Always have fresh eggs, thanks to this dispenser, fill the dispenser with 12 XL size eggs, maybe 13 or 14 other sizes.
-(TPU) Optional anti-fall stop and slowdown stop, it is not necessary, but it gives more security .
-Glue and assembly needed
-72mm wide / 296mm deep / 151mm tall.
Made by: “Ljhtom” on Thingaverse and Printables
10% Infill (grid, for more strength)
0,2mm LH
2 walls
0,4 nozzle
Comment & Rating (132)
All
Print Profile
0.2mm layer, 2 walls, 10% infill
perfecto, muchas gracias
2
Reply
Mine was printed with that. How do I remove it? It's pretty stuck in there.
The designer has replied
0
Reply
thats the support for the oval itself. remove it with pliers or force. it should pop off as any other internal support material would - if your printer is well calibrated and up to date with maintenance.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
Nice model that prints without any problems.
Good to have in the refrigerator.
Printed with Bambulabb translucent PTEG.
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
PETG, easy, nice. I can't print TPU.
1
Reply
Print well. I used hot glue to hold it in place and it's very secure and has been used for a while.
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
good
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
printed well in PLA, gluing is absolutely nessesary.
The designer has replied
0
Reply
indeed, as statad in the disc
0
Reply
good model! went all in with pla, no need to use the slow down thingy imho
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Sehr gut zum Drucken, hält sehr Gut, habe es mir PETG gedruckt und passt perfekt in der Tür rein.
1
Reply
Print Profile
ABS 0.2mm layer, 2 walls, 10% infill speed 50%
great print, made it out of abs and glue them together and works great.
1
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld