Moose at Sunset (hueforge)

Moose Silhouette at Sunset wildlife scene (hueforge) This is a 5 color, but if you want to drop to a 4 you can remove the red, it'll only change the sunset a little, but I preferred it with the red in there.

See Printing instructions below.

you can scale to any size you want, but make sure you don't change the “Z” axis or it will throw off the color sequence.

Need a way to display theses? check out my Wall Mounted Modular Hueforge Display complete it with the optional Desk Mount

Printing Instructions:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm

The Model is 200x112.31mm in size

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Sunny Orange Transmission Distance: 8 (works very close with the Bambu Basic Red as well).
PLA+ Sunlu Yellow Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #13 (0.72mm) swap to Red
At layer #17 (0.88mm) swap to Sunny Orange
At layer #25 (1.2mm) swap to Yellow
At layer #32 (1.48mm) swap to White for the rest.