Advanced Pet Treat Puzzle - Free 3D Print Model

Search models, users, collections, and posts

gustav.ferdman

Household>Pets

IP Report

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 2 walls, 15% infill

Designer

2.9 h

2 plates

4.9(57)

Large version

9.5 h

4 plates

4.9(11)

Open in Bambu Studio

Boost

329

1036

122

769

598

Released

Description

Please drop a like of you enjoyed it and don't forget to post your makes!

A puzzle for your dog or cat which you can fill with treats and watch your pet figure out how to open it!

Very little and easy to remove support for just one of the parts, the Spinner.

I have added all the STEP-files.

Printing:

Material: PLA or PETG

Layer height: 0,24mm or lower

Infill: 15%

Supports: Only for the Spinner for middle overhang.

Print all parts laying flat for the best result.

Assembly:

Insert all 6 Sliders into their slots on the Base.
Attach the Spinner over the Base.
Secure the Spinner with the Lock by pressing the Lock down hard in the middle, it might need a little bit of glue to seal tight.
Fill it with treats and have your pet go at it! :)

The standard model measures 170 mm in diameter and 15,5 mm in height (I have a tiny dog). Naturally, it's scalable to your liking. ;)

More stuff for your pets in the links:
Pet Comb (Fully printable)

https://makerworld.com/en/models/438243#profileId-343631

Dog Bowl - Portable PET-bottle Adapter
https://makerworld.com/en/models/450390#profileId-357350

The original pet-treat puzzle
https://makerworld.com/en/models/424729#profileId-328162

Comment & Rating (122)

@XaaDia

Print Profile

0.24mm layer, 2 walls, 15% infill

Print successful. Puzzle solved. Treats secured. Ferrets victorious.

The profile uploader has replied

@gustav.ferdman

Sweet looking dogs you got there

(Edited)

@WillpowerFPV

Boosted

Replying to @gustav.ferdman :

I believe those are pitbulls, if im not mistaken.....😑

(Edited)

@jordan.arendt

Boosted

I’ve got 3 or four commercial ones of these type. This is definitely a more advanced one. The bugger still finished it in a couple of minutes. Thanks for the model. Will be using it a lot!

The designer has replied

@gustav.ferdman

Wow, that's a smart dog! Thanks for the feedback, would you like a lvl 3?

@jordan.arendt

Boosted

Replying to @gustav.ferdman :

is level three harder than this one? If so, absolutely!

@gustav.ferdman

Replying to @jordan.arendt :

I can make a harder one, just need to figure something out. Maybe some sort of multi lock system? Or maybe a gear system so that the pet needs to turn a wheel many rotations to open a hatch?

@user_1754892810

Print Profile

0.24mm layer, 2 walls, 15% infill

good print dog loves it

The profile uploader has replied

@gustav.ferdman

Why the 3 stars?

@user_1754892810

Replying to @gustav.ferdman :

I kept trying to do 5 but the app wouldn’t let me.

@gustav.ferdman

Replying to @user_1754892810 :

It happens sometimes if you for example abort a print (even if you do it later). Glad you liked it!

(Edited)

@Gilbear

Boosted

Thank you very much 👍

The designer has replied

@gustav.ferdman

You're welcome! :)

@7ero

Can you please post your remix? It looks better for crows.

@Gilbear

Boosted

Replying to @7ero :

I used the designer's profile. For the BasePlate I swapped the filament at layer 22 and 61.

@DaddyOJ

Boosted

High quality print and great pet puzzle! Printed the "Large version" remixed by @bovineblitz . Be aware in this version Plate #3 needs supports enabled. My daughter greatly appreciates it for her little Japanese Spitz, Bellissimo. Keep up with the great designs! Used Kingroon PETG Yellow and Dark Blue.

The designer has replied

@gustav.ferdman

Thank you!

@3DDruckJunkie

Absolutely great. Thank you very much

The designer has replied

Show original

@gustav.ferdman

Danke!

@user_1620198501

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

came out great. My dog was busy for hours.

The profile uploader has replied

@gustav.ferdman

Never thougth I would see so many people posting pics of their dogs because of this, happy to see that your dog likes it!

(Edited)

@Bloodduty

Puppy loves it, used the larger print as she struggled with the smaller one (which was gifted to my sister's cat!) Really nice quality print.

The designer has replied

@gustav.ferdman

Thank you!

@WillpowerFPV

Boosted

this is the best pet puzzle of this style that i've found so far. his other ones haven't really been much of a challenge for him, so adding another layer of complexity felt necessary. he figured it out pretty quickly the first time, the second time he was a bit slower, and then by the third time it's like he couldn't figure out what he did the first two times. I realized that it kind of lucked out by hooking his nail onto the rotating portion by accident, but he's not super dexterous. I had printed it as per your profile, but I went in afterwards and added some Primitives to the rotating portion on top, so that he had something tactile to grip onto. I apologize for making it look ugly, but this was literally a 5-minute fix where I just flipped it over added some chunks, flipped it back and then printed it with tree supports. to my surprise it actually worked, and he's enjoying it a lot more now. Great design, here's a boost!

The designer has replied

@gustav.ferdman

Thanks for the review! I just made this for my dog a while back and never imagined it blowing up the way it did.

@Schondras

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Liked the first one, this one is better! Printed perfectly. I did have to re-print the green locking section after I melted the original while cleaning off dog saliva - don't use super hot water on PLA! ;)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Russian Maze Puzzle Gift Box - HARD

3DPrintCraft

27.2 k

6.9 k

GIF

Fiddle Fidget

haptic3D

15 k

3.2 k

Death Whistle

BEAMink

31.1 k

4.6 k

Origami Transforming Cube

Austin Vojta

40.9 k

11.9 k