Pet Comb (Fully printable)

More stuff for your pets in the links:
Dog Bowl - Portable PET-bottle Adapter
https://makerworld.com/en/models/450390#profileId-357350

Pet treat puzzle (dog or cat)
https://makerworld.com/en/models/424729#profileId-328162

Advanced Pet treat puzzle (dog or cat)
https://makerworld.com/en/models/549253#profileId-467530

A fully printable pet comb for removing lose fur and matted fur from your dog, cat or other pet.

All parts fit into one print on the a1 mini so it should fit in just about any printer.

The design is modular so that custom blades can be added for getting different lengths or shapes of the blade.

Printing:

PLA

0,2mm, 15% infill, 3 walls

8x blades, 1x handle, 1x blademount, 2x nuts, 2x screws.

Assembly:

1. Screw one of nut onto the long square rod with threads on its ends, the thread will be tight at first but it losens up by turning it back and forth a little. Don't screw the nut all the way in. The back of the nut should be flush with the end of the rod.
2. Mount the blades onto the square rod one by one. They have a tight fit so that they wount wiggle but should be quite easy to slide on.
3. Add the other nut the same way as the first one.
4. Tighten both of the nut well by turning both add the same time, avoid using tools as it might crack the plastic parts.
5. Mount the assembly on the handle.
6. Secure everything by adding the bolts on both ends of the handle. Tighten them the same way you tightened the bolts.
7. Grab the closest pet you see and try it out! :D

Drop a like and please post your makes! :)

If you liked this model I'm sure you will find something interesting among my other models, check out my profile.