Print Profile(6)
Description
HOW TO ASSEMBLE:
PLA:
1) If you have printed the strap with PLA you can use a heatgun or hair dryer to bend it to the right shape.
→ 
→ 
2) Now you can cut the toothpick into 2. Put a little glue on the hole of the strap and the croc. Then insert the toothpick through the strap and then through the croc. Move a little with the strap so it doesn't stick.
3) When the glue has dried you can now do the other side.
4) Wait again for the glue to dry , Then trim the toothpicks so you can see it mider well.
5) Stick it in your croc and enjoy it :)
TPU:
1) If you printed the strap with TPU you can normally just bend it.
2) Now you can cut the toothpick into 2. Put a little glue on the hole of the strap and the croc. Then stick the toothpick through the strap and then through the croc. Move a little with the strap so it doesn't stick.
3) When the glue has dried you can now do the other side. 4) Wait again for the glue to dry , Then trim the toothpicks so you can see it mider well.
5) Stick it in your croc and enjoy it :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)