Aquarium adjustable outflow nozzle - Free 3D Print Model

Search models, users, collections, and posts

ZombieGoat

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 25% infill

Designer

1.2 h

1 plate

4.9(15)

Open in Bambu Studio

Boost

226

556

653

337

Released

Description

Printed and works great. Never used the linkages but they work fine.

I don't recommend more than three linkages. It gets too heavy and sags.

Takes a bit of pressure to snap pieces together.

Use a brim when printing.

Comment & Rating (42)

@ruyi_168

This design is good, but installation takes a lot of effort, is there a print-in-place version

The designer has replied

Show original

@ZombieGoat

Sorry there is no print in place version. Your print looks great though.

(Edited)

@jessejb1392

Print Profile

0.2mm layer, 3 walls, 25% infill

used with a part I made and joined them together to get more lift. works good

The profile uploader has replied

@ZombieGoat

Awesome. Looks good

@underJakk

Can you post the CAD files so i can adjust the sizing of the input nozzle in my software please

The designer has replied

@ZombieGoat

What file format are you looking for? STL?

@underJakk

Replying to @ZombieGoat :

I was hoping to get the actual CAD files like .dwg or .dxf those are easier to modify directly (I think anyhow)

@ZombieGoat

Replying to @underJakk :

If you tell me the inner diameter of the inlet you need I can post a 3MF for it.

@montaberne

Print Profile

0.2mm layer, 3 walls, 25% infill

This is exactly what I needed! Thank you. It does require a lot of force to assemble, but it works great. Would have been nice to include the connector outside diameter. For anyone needing to print for a standard 7/8in fitting, just scale the parts to 110.42%.

(Edited)

The profile uploader has replied

@ZombieGoat

I made this for a friend. I don’t have any fish so I had no idea what was required other than what he asked me to make. I don’t even know how or what this attaches to. If you leave me a link or a picture, I can perhaps purchase whatever it attaches to so I can create a perfect fit. Thanks for the review.

@montaberne

Hey no worry, you did good man! This part will be used to connect to a filter output, in order to control the direction and the flow of the filtered water. Since these parts can come in a lot of different sizes, my suggestion was to put the current size in the description : External diameter of 18.228mm / 0.72in. In the end, most people will measure it in their slicer and adapt it, no big deal. Here's a quick pic of how I use it in my tank. I "rescued" a betta fish and he really hates heavy flow so I used uour part to fine tune the global current of the tank. I might use your wider attachment in the near future but for now the fish seems happy. Here's the little guy inspecting your model (don't mind the dirty tank).

(Edited)

@user_182314845

what size does this print at ? I need 3/4

@RalphN

Print Profile

0.2mm layer, 3 walls, 25% infill

A bit too much play in the joints but it works okay for what I needed it for

The profile uploader has replied

Show original

@ZombieGoat

Did you use my print profile? What type of filament did you use? I know if you link too many pieces together that the water pressure will make it sag, but the joints themselves should be fairly tight. It should take quite a bit of pressure to snap them together.

@RalphN

Replying to @ZombieGoat :

I use petg,

@ZombieGoat

Replying to @RalphN :

Use PLA and see how that works for you. That’s what the print profile was made for.

@KSProHack

Top thanks!

The designer has replied

Show original

@ZombieGoat

Glad you like it. Thanks for the review.

@user_1088885155

Print Profile

0.2mm layer, 3 walls, 25% infill

Works well but i flipped the nozzle when printing for bigger plate area

The profile uploader has replied

@ZombieGoat

Glad it worked out for you. Thanks for the review.

@Quaihn

Print Profile

0.2mm layer, 3 walls, 25% infill

it wasn't the right size for my filter. but with an adapter it works just fine.

The profile uploader has replied

@ZombieGoat

I’m glad it worked out for you. Thanks for the review.

@user_1035171152

I didn't like it it leaks from all connections I'll see if glue fixes it but I don't recommend it

(Edited)

The designer has replied

Show original

@ZombieGoat

I haven’t had any other complaints about it leaking. Perhaps it has to do with the filament you’re using. Maybe expansion and contraction issue. What type of filament are you using? And did you use my print profile, or did you change any settings?

@Hardgeballer

Print Profile

0.2mm layer, 3 walls, 25% infill

Perfectly printed in ABS

The profile uploader has replied

Show original

@ZombieGoat

Awesome. I was curious how it would print in ABS. Thanks for the review. :)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.