Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 4 walls, 25% infill
Designer
2 h
1 plate
Open in Bambu Studio
Boost
4
10
1
1
15
14
Released
Description
Compatibility
The clamp was designed with the Philips Avent babyphone in mind but it might also work for other babyphones.
Attaching the babyphone
The idea is to attach the babyphone on the round plate either with rubber bands or double-sided tape.
Notes regarding the screw model
There are two models for the M20 screw: the “low tolerance" should work fine for most printers and filaments. If for some reason it doesn't fit try using the “high tolerance” version.
Recommended print settings
- PLA works absolutely fine for this application. The pictures show prints with AzureFilm Silk Dark Copper.
- 0.2mm layer height (screw and bracket)
- At least 3 perimeters
- No supports needed (faces with the embossed logo are facing the print bed)
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)