Print Profile(3)
![[78] 0.2mm layer, 2 walls, 12% Gyroid infill](https://makerworld.bblmw.com/makerworld/model/USe2ec635e4c78f5/144273193/instance/2024-07-29_1035e26367f3.png?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[149] Updated 0.2mm layer, 2 walls, 12% infill Gyroid](https://makerworld.bblmw.com/makerworld/model/USe2ec635e4c78f5/161131703/instance/2024-10-06_122f3a9cbbc258.png?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Well I made this myself on Fusion 360 and figured I would upload it for others. I print it at 100% infill and no supports for both the files. Usually the overhangs are pretty good on my p1s, but for the little stringys I get I hit the stand with a heat gun (or just use a blow dryer). I just made the little wall thing for fun and glued it onto one of my pre existing stands to hold my airpod case. This is the original one I made myself, I have everything to prove it if needed, but there are some copy's taking credit for this design out there on other websites.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (382)