Swytch bike cable organiser

Used to organise Swytch 2nd gen ebike conversion cables. (It may work for other generations but I have not tested)

I made these cable organisers that you can stick onto the frame of your bike. Apply hot glue to the rear of the model and then apply pressure to bike. You should apply the model quickly after putting hot glue on.

There are two models included:

• cable_runner_motor_6mm v8: This is for the thick motor cable which is 6mm in diameter.
• cable_runner_4mm v8: For the pedal sensor cable which is 4mm in diameter.

Material:

• PLA
• PETG (recommended, this is what I used)