98mm Coffee Grinder Burr Case

I have a set of AliExpress burrs that I came without a box. These cases are made to safely store burrs without damage and to be easily identifiable. When printing the coloured lettering I use colour by layer and do at least 2 layers so that the colour is strong, and it makes a ring around the edge that makes it easier to identify side on. So far I have tried to match the colour to the burr appearance, but you could make them as colourful as your imagination. Not sure if the lid colour changes come through the upload/download process. If not change layer 3 to the text colour, and layer 5 back to the main colour. The threads are surprisingly strong and I haven't been able to break them by hand. The lid DOES NOT tighten down all the way to the base because it needs to maintain force on the burrs to stop them rattling about. Make sure to tighten at least 1-2 whole notches past where the lid contacts the Upper Insert piece.

These should fit all 98mm burrs, but have only been tested with the following burrs:

• 98mm SSP
• 98mm AliExpress knock-off

This case SHOULD FIT the following burrs but are UNTESTED:

• Mahlkonig EK43 burrs
• Kafatek 98mm
• Option-O 98mm

If you have any suggestions or requests please let me know. If you try the case with anything not listed above please let me know the results so I can add them here.