Search models, users, collections, and posts
PERC H310 40mm fan bracket
Print Profile(2)
OPTIMAL 0.16mm layer, 3 walls, 15% infill
Designer
1.2 h
2 plates
0.16mm layer, 2 walls, 15% infill, PETG
45 min
1 plate
Open in Bambu Studio
Boost
19
57
16
9
73
42
Released
Description
EDIT2: Added a notched version for cable routing. Thanks to user_1328709226 for the idea!
EDIT: Now updated with a temperature measurement. At 23c ambient the heatsink got up to 38c after writing 250GB's of data to the array.
A fan bracket to mount a Noctua 40mm fan (or presumably any 40mmx10 fan) on your PERC H310 HBA.
I included a little 0.5mm spacer that may help achieve the right friction fit. Alternatively, just scale the model up/down a bit in the Z dimension. Apparently the heatsinks don't have the greatest tolerances.
You probably want to print this in something other than PLA due to its low HDT.
Yes, I'm aware two zip-ties would probably work as well. But where's the fun in that?
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (16)