MTG Rollup Dice Box

Based off of the amazing design from 3DPrinty! See the link below for more information.

I've overhauled the aesthetics of the box by giving it a design theme for Magic the Gathering.

Printing

• Printing has been tested in PLA, matte PLA, and sparkle PLA. I've also tested printing the tower core in TPU, this can help to make the dice rolling much quieter!
• All parts can be printed without supports.
• Add a brim if you experience curling issues on tight corners.

Assembly

• Glue eight 6x3mm magnets into the start and end bins. Make sure the magnets are oriented so that they pull the bins together.
  • https://www.amazon.com/gp/product/B084VGP2LY
• Use a scrap of unprinted 1.75mm filament to connect all six bins together.
• Align the top of the core with the bottom - make sure that the two ends are correctly rotated.
• Firmly press the core top into the core bottom. These parts are a very tight fit and may require a lot of force to close. To avoid damaging either part, apply pressure only near the center of the top and bottom.