Bambu Printer Drawers

Hey there! Check out my website to see the latest products I've designed—now available for you! 
Don't miss out, hit the link and explore what's new!
My Shop: https://buymeacoffee.com/cc3dprojects/extras

My Website: https://www.cc3dprojects.com/

My YT Channel: https://www.youtube.com/@CC3DProjects
UPDATE:

If y'all run into issues alignin' that rear tube with the printer's poop exit hole, download the file “POOP DOWN PIPE CENTER” from the raw models, and y'all'll fix that problem right up.


 

UPGRADE:
After noticing that some of you are experiencing issues with the lower curve of the drainage pipe, I thought of tweaking it in the hopes of solving your problem. The piece you'll need to reprint is named: “Poop Down Pipe Lower.3mf”.

Let me know if this resolves the issue for you. Thanks!

UPDATE:

Hello everyone, following some reports, I have uploaded modified files:

Let's talk about the drawer rails; now you have a right and a left file. Let's talk about the build plate supports; now you have both the right and left ones, available in 3 or 4 plates.

• If you're looking for an add-on for this dresser, check out this model:
  https://makerworld.com/en/models/65463#profileId-68830

Hello everyone,

My printing space was running out, and I had to find a solution. Also, the Bamboo X1C-style printers are making me hunch over while checking the print progress, especially if you have AMS mounted on the upper glass.

So, I've thought about a drawer unit to place under the printer, designed to elevate it by about 20 cm from the surface. This will allow me to store various tools and adhesives, spare parts, and make it easier to manage the poops produced by the prints.

I printed everything in PETG. The printing parameters are as follows: Walls: 3 perimeters Bottom and Top: 3 perimeters Infill: 10% Layer Height: 0.2 mm.

In the filename, if you find an 'x' followed by a number, that number represents the times you need to print that piece. In the absence of 'x', the piece should be printed only once.

To print everything, it will take about 6 days non-stop, totaling 4 kg of filament.

Here is the material you need to complete the assembly:

You will need 18 magnets and 60 screws as per the link.
Screw M4 12 mm
Magent 8x2 mm

Drawer rails fastening:

https://www.amazon.it/dp/B07VKYYT1H?ref=ppx_yo2ov_dt_b_product_details&th=1

Drawer front:

https://www.amazon.it/dp/B07WSBTYV2?ref=ppx_yo2ov_dt_b_product_details&th=1

Poop pipe:

https://www.amazon.it/dp/B07WSBTYV2?ref=ppx_yo2ov_dt_b_product_details&th=1

Sliding drawer:

https://www.amazon.it/dp/B07WSBTYV2?ref=ppx_yo2ov_dt_b_product_details&th=1

For assembly, follow the letters and numbers marked on the top side of the pieces. To be clear, it's the side where the printer will rest after assembly.

I didn't use glue, but the choice is up to you. I also applied foam strips both on the top and bottom of the drawer unit to prevent it from sliding due to vibrations.

This model is not suitable for those who do prints requiring a high number of color or material changes.

I remain at your disposal, and in the meantime, happy printing to all of us.