Search models, users, collections, and posts
Box for Battery Discharger - Aokoda
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 15% infill
Designer
48 min
1 plate
Open in Bambu Studio
Boost
1
0
0
0
2
0
Released
Description
The design ideia is from emeraldmeadows (https://www.thingiverse.com/thing:2419239) i just made some minor changes to the concept.
The holes in the box and lid are tight enough to use a tap. I use M3 screws for the box and M2.5 for fixing the ceramic sockets to the LID. You can also use Nuts if you prefer but you need to drill open a bit the holes.
The discharger in question is this one: Link
I recommend printing this box in ABS/ASA.
Boost Me (for free)
If you enjoyed this model, please consider giving me a boost to support more creations. Keep printing and may your nozzles never clog. Thank you very much!
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (0)