此模型已加入CC BY-NC-SA 4.0 共享协议,个人玩耍随意,商业用途请联系本人获取授权。
Following the trend, the launch mechanism refers to the popular 6-Shot Disc Shooter
Appearance reference TEC-9 submachine gun (semi-automatic)
Default support required (support hanging angle 10 °, tree shape)
It is best to use PLA printing for the trigger, as PETG has insufficient toughness and is prone to damage
If the trigger is stuck, please lubricate the slide rail or remove the pull handle and baffle
Assembly process: https://www.bilibili.com/video/BV166421Z7jL/
Update:
1、The printing configuration has added a segmented model (Split 2) of the gun barrel that is compatible with A1 mini. You can print it separately and use glue to bond it together
2、The pull handle is relatively easy to damage, so I added an M3 screw reinforced version to the original STL model.
3、If you feel that the trigger is too strong, there are three levels of trigger power to choose from (increasing the force from top to bottom).
This model has been added to the CC BY-NC-SA 4.0 sharing protocol. Personal play is optional. For commercial purposes, please contact me for authorization
跟风之作,发射机构参考前段时间流行的6-Shot Disc Shooter
外形参考TEC-9冲锋枪(半自动)
默认需要支撑(支撑悬垂角度10°,树型)
扳机最好使用PLA打印,PETG韧性不足容易损坏
如果扳机卡顿,请对滑轨润滑或拆除拉机柄和抛壳挡板
DIY交流群:477845792(QQ)
更新:
1、打印配置增加了适配A1 mini的枪管分件模型(分盘2),你可以分件打印后用胶水黏合使用
2、打印的拉机柄比较容易损坏,所以我加了个M3螺丝加强版本放在STL原模型里。
3、如果你觉得扳机太硬,还有扳机三档威力可选(从上到下力度依次提升)。