PTFE-Mini-Plug "PMP" / PTFE-Mini-Stoepsel - Free 3D Print Model

Search models, users, collections, and posts

ThePrinterDE

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 5% infill

12 min

1 plate

4.8(71)

Open in Bambu Studio

Boost

158

521

614

362

Released

Description

Ein kleiner Stöpsel, um ein PTFE-Schlauch mit 2mm Innendurchmesser (+/- 0,2mm) zu verschließen.

Gedruckt mit PETG Basic - sollte aber auch mit allen anderen Materialien druckbar sein.

Tipp: Den Stöpsel nur locker in den Schlauch drücken bis er gerade so festsitzt. Beim Eindrücken “bis zum Anschlag” wird der PTFE-Schlauch sonst ggf. geweitet und passt nicht mehr in die normale Schnellkupplung.

Happy printing…

Comment & Rating (74)

@Cool_Park

Print Profile

0.16mm layer, 2 walls, 5% infill

It works great though it is small. Thank you to the creator.

Show original

@user_683739030

Print Profile

0.16mm layer, 2 walls, 5% infill

Perfect PTFE tube plugs…printed several in PLA to have on hand. Thanks!

@bigriknyc

Print Profile

0.16mm layer, 2 walls, 5% infill

Use this to plug up PTFE tube for external spool.Fast and clean print.

@wolffenheisen

Print Profile

0.16mm layer, 2 walls, 5% infill

does the trick!

@user_311793092

Print Profile

0.16mm layer, 2 walls, 5% infill

Great job!

@cyberbruce

Print Profile

0.16mm layer, 2 walls, 5% infill

perfekt 👍

@TinkerVault

Print Profile

0.16mm layer, 2 walls, 5% infill

Thanks

@MeetYourMaker

Print Profile

0.16mm layer, 2 walls, 5% infill

Does the job.

@user_3230615209

Print Profile

0.16mm layer, 2 walls, 5% infill

printed well

@user.DragonEyes

Print Profile

0.16mm layer, 2 walls, 5% infill

Had to resize to get to fit in my PTFE tube, as was too wide to fit and too long as I didn’t want it to break and leave a bunch inside while trying to remove it, I have original PTFE tubing from Bambu printer setup. Even tried .016 optimal print quality and 50% speed.. but each comes out unsmooth at end. Not sure what I’m doing wrong.. possibly the dual color PLA filament/not the one shown in pic though,. May try again with PETG.