Drill Dust Collector
Print Profile(11)
Description
Boost Me (for free)
If you found this model useful, please consider giving it a Boost — it really helps support future designs and projects!
This Drill Dust Collector sucks to the wall and removes the dust when connected to a dust extractor. It has a 35mm diameter hose size, which should accommodate most workshop vacuums (I am unsure about home vacuums). Can drill holes up to 25mm.
It is designed so that you can attach foam tape to the rim. This will protect your walls from scratching and provide a better seal. This is the foam tape that I used.
If you are looking for a good Shop Vac that won't break the bank, then this is the one I use Fein Shop Vacuum.
- Nozzle: 0.4mm
- Layer Height: 0.20mm
- Infill: 15% with Rectilinear Pattern
- Orientation: Orientation is important, see image
- Supports: None Required
- Brim: A large brim is recommended
I would recommend printing this print PETG rather than PLA for increased durability.
------------------------
If you’d like to support my work, you can buy me a coffee here ☕
You can also find more projects, tutorials, and workshop content over on YouTube.
Membership
Want to Donate or use my models for Commercial Purposes, please consider becoming a Member.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1040)