Bambulabs poop container by OlleMark

OlleMark

3D Printer>3D Printer Accessories

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

My Recommendation

Designer

10.5 h

2 plates

4.8(189)

Painted for AMS | My Recommendation

Designer

33.4 h

2 plates

4.4(42)

PLA, Spiralized (Vase Mode) Print

2.5 h

1 plate

5.0(20)

0.6mm nozzle, 0.3mm layer, 4 walls, 25% infill

4.8 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

639

1083

306

3 k

1.5 k

Released

Description

Updates:

01-11-2023 - Added a 95% sized container that fixes the printing over the edge if the plate is not attached all the way to the left, print this to be safe. :)

03-11-2023 - Made the standard sized model 97% size to prevent any issues.

A poop container in the style of a real container with a bambulabs logo+text version available.

OBS! When printing any of my profiles make sure your plate is attached as far left as possible because otherwise it could print outside of the plate. :)

OBS2! This models was designed with the P1 and x1 series not the a1 series :)

A painted version for ams users is available but it is sadly untested because i dont have an ams so if any tweaks is needed please tell me or upload your own profile! :)

My recommended settings:

0.25mm layer height

0.42mm line width

10-20% infill

Comment & Rating (306)

@KENPRINT

Lovely model thanks Ollemark Printed mine with 0.6mm nozzle and didn't lose much detail at all really but cut the print time in half looks really nice

The designer has replied

@OlleMark

Thats awesome, thank you very much! Need to get myself a 0.6mm nozzle :D

@KENPRINT

Replying to @OlleMark :

i got some minor stringing but it could just be from wrong temps with the larger nozzle - quick flame from my torch and mint again

@KENPRINT

would you consider doing a remix of this model to make them stackable with either pegs and holes or magnets top and bottom ? would like to use these for storing printer parts or maybe even make the inner a drawer so you can stack them and pull out the drawers to access your spare parts

@Kyaenos

Print Profile

Painted for AMS | My Recommendation

came out perfectly!! amazing model!

The designer has replied

@OlleMark

Wow that is probobly the cleanest one i have seen! Thanks for sharing :D

(Edited)

@flow88

wow that is damn clean :) nice job

@HammerockOwl

Print Profile

Painted for AMS | My Recommendation

Very cool print. Works well on standard settings of the printing profile. There were only a couple spots around the side pieces that had stringing or warping. For the white, I used PLA Matte Ivory White. This had some layer issues on the bars on the side of the container where it separates from the bar. It also had some minor stringing that was easy to clean off on the decals on the side. I used PLA Basic Green (10500) and PLA Matte Charcoal (11101) for the green and black. The black also had minor stringing and both had 1 layer issue on the back where it did not bend with the container and went on a straight line. Overall, top notch model, just minor issues that can be fixed with post processing. Forewarning though, the AMS version does purge a ton due to all the color changes on standard settings. One of the pictures shows the model filled with all of the waste filament from the print.

(Edited)

The designer has replied

@OlleMark

Thank you very much for the incredible comment and review! Your colors look freaking amazing! :D I have thought about making a version that prints the sides flat that you then attach afterwards to reduce the waste, not sure how to otherwise fix it :/

(Edited)

@HammerockOwl

Replying to @OlleMark :

yea totally! Other than separate pieces, not sure how it could be fixed either but honestly if you can recycle the filament it's not a huge concern anyways

(Edited)