Jonas Gartner

cover

IMG_1424_6d868248-a260-409e-b38f-fa5b9dc4e78a.png

IMG_1425_3cbdd4bf-5dda-4fea-b53a-a0bf8842b0a1.jpg

IMG_1427-ezgif.com-video-to-gif-converter_973a6e92-2db3-4ba5-bbff-e79eb844b600.gif

plate_1.png

IMG_1424_6d868248-a260-409e-b38f-fa5b9dc4e78a.webp

0.2mm layer, 6 walls, 25% infill - No supports

user_2127997463

ff1148bad655a0606332ec6746ada98.jpg

09565d76a2c204fd21b7674b3779ed0.jpg

0dd01a3b22671b0970ef6adaf03273b.jpg

8e8868faf2417f468bc380f28cf2648.jpg

76aa5415d67fb2cbf36ab118c55596c.jpg

7026b5cbda6f9069968aaebe116c93f.jpg

7133dbe3c732bf6b290c29e8cb6ad33.jpg

28455c5984747c1887882a317b7743d.jpg

aa6a6f36818edd5d03440b61f2ee15b.jpg

bb83df6aaa6b1777322740c9e2c7f34.jpg

感谢分享，这是一个很好的模型，在我使用过程中，我也对这个模型进行了一些修改，我现在可以非常方便舒适的使用这个牙具。我做了以下修改：1杯身，我进行了密封，现在他是一个合格的漱口杯（若担心孔隙滋生细菌，那么可以100%填充杯身可能会减少空隙）。2刷头夹子，我在根部做了加强，对夹口末端做了收束。（我使用原版时断裂过根部，加强根部后我的修改版使用段时间后出现了夹不到的情况）。3底座，我超级加倍了底座的排水与通风，对底部做了超大开孔，开孔在侧边还延伸出了通风条，并且打通了两侧功能区，放牙刷的仓位做了凸点，抬高牙刷，避免水垢淤积。（我的第一改版只是加密了一些排水孔，但是依然排水不畅，并在使用长时间后发现底部有依然有垢痕，所以这次我对通风做了极大的加强）。4我在底座的接口处做了切口，降低拔插力（因为原模型接口过紧加上老化，长时间使用后杯口接口出现过断裂）。我的这些修改都是使用负零件在原模型上进行修改的，这非常方便，再次感谢原模型的提供者。

Thank you for sharing, this is a great model. During my use, I also made some modifications to this model, and now I can use this toothbrush very conveniently and comfortably. I made the following modifications: 1. Cup body: I sealed it, and now it's a qualified mouthwash cup (if you are worried about bacteria breeding in the pores, then 100% filling the cup body may reduce the gaps). 2. Brush head clip: I strengthened the root and converged the end of the clamping mouth. (When I used the original version, the root broke, and after strengthening the root, my modified version couldn't clip after using it for a while). 3. Base: I super-doubled the drainage and ventilation of the base, made a super-large opening at the bottom, the opening extended ventilation strips on the sides, and opened up the two functional areas on both sides. The toothbrush compartment has protrusions to raise the toothbrush, avoiding water scale accumulation. (My first modification only increased the density of some drainage holes, but the drainage was still not smooth, and after using it for a long time, I found that there were still stains at the bottom, so this time I greatly enhanced the ventilation). 4. I made cuts at the interface of the base to reduce the insertion and removal force (because the original model interface was too tight and aged, the cup mouth interface broke after long-term use). All of these modifications were made using negative parts on the original model, which is very convenient. Thanks again to the provider of the original model.

Sealed upper rinse cup + enhanced ventilation base + reduced connection tightness + reinforced brush head clip

Check out my electric toothbrush travel case! Unlike most existing models it fits on the A1 mini printbed, is less clumsy and also more estetically pleasing. It is made to fit all different kinds of electric toothbrushes, has small holes for ventilation and fillets on all inner edges to prevent dirt buildup. It also has a small compartment in which you can keep a travel size toothpaste or Qtips.<figure class="image image_resized" style="width: 20.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000487824/design/2024-06-07_1dc7448e38eaf.gif"><figcaption>The lid fits quite tightly so I recommend opening it like this instead of just trying to rip it off.</figcaption></figure>&nbsp;The inner height is 200mm which i think fits all oral-B toothbrushes (tip removed), if you have a taller one you can stretch the model a little in bambu slicer.

Slim Toothbrush Travel Case - A1 mini compatible

漱口杯+电动牙刷收纳（加强底部通风，减弱连接紧密，加强刷头夹）

Mouthwash Cup + Electric Toothbrush Holder (Enhanced bottom ventilation, reduced connection tightness, reinforced brush head clip)

Jarek

1576ce26-551b-457e-bc44-296dacc7cb49.jpg

Toothbrush Travel Case  A1 mini for 2 toothbrushes

ASIA

Print Profile(2)

Description

Comment & Rating (106)

License

Remixes (2)

Related Models