Slim Wallet (V4) - print in place by MakerVerse Designs

MakerVerse Designs

Tools>Gadgets

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.15mm layer, 2 walls, 7% infill

Designer

2.1 h

1 plate

4.5(120)

A1mini - 0.15mm layer, 2 walls, 7% infill

Designer

2.4 h

1 plate

4.0(31)

AMS Modified

7.7 h

1 plate

4.5(2)

Open in Bambu Studio

Boost

666

960

196

109

2 k

1.5 k

Released

Description

A print-in-place slim wallet that offers space for 7 cards and a drawer for cash.
I looked for a long time for a wallet that had enough space for cash, but I couldn't find one so I made this one myself.

This ist the Updated Version of Slim Wallet (V3):

It´s more than 30% thinner than the previous model

It´s print in place
has a cash drawer with enough room
has place for up to 7 cards
cards can be securely locked due to a lever on the side
The drawer snaps in and holds its position

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.

Comment & Rating (196)

@user_2285199576

The print profile is no longer public

naja die unteren Ebenen werden nicht sauber gedruckt.

The designer has replied

@MakerVerse

I'm very sorry. I updated the files so this shouldn't happen again

(Edited)

@user_2285199576

thx

@P4rad0x

@MakerVerse i got the same problem but i try another filament maybe its on my end. can u flip the mechanic so that the drawer is in front but the mechanic is on the right side? because im left-handed and this would work better for me

(Edited)

@jimmoose

Print Profile

0.15mm layer, 2 walls, 7% infill

good one

@Tripi

I think this is a much better design

@user_1737917808

what model is this?

@Tripi

it broke up as soon as I tried to use it... I used PETG.

@Tripi

cards also fall out if you flip it upside down u_u

@pichara55

Print Profile

0.15mm layer, 2 walls, 7% infill

good ; thx

@user_2050366377

there's an error in the file that makes the print fail. a missing part in the base of the wallet.

The designer has replied

@MakerVerse

Thank you for your comment. I updated the files so this shouldn't happen again

@Trollz00r

Boosted

Print Profile

0.15mm layer, 2 walls, 7% infill

prints fine

@ddletigre

Boosted

Print Profile

0.15mm layer, 2 walls, 7% infill

Perfect!

@user_1275101153

Boosted

Print Profile

A1mini - 0.15mm layer, 2 walls, 7% infill

Really good fit both my card money and key in such a small form (print with A1mini PLA basic 0.4 nozzle) I fit 2 key and 2 banknote easily in tray pocket can fit 7 standard cards easily , the locking mechanism work fine