Blackpink Born Pink - HueForge Print

Album cover for Blackpink's album Born Pink.

Measures 120mm x 120mm (approx. 4.75" x 4.75") - just like a CD booklet insert!

The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 120x120mm in size
You may print at higher layer heights below the Min Depth of 0.76mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
PLA BambuLab Basic Gray Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Red Transmission Distance: 0.3
PLA BambuLab Matte Sakura Pink Transmission Distance: 2.2
This print uses 5 unique filaments

Swap Instructions:
Start with Gray
At layer #8 (0.44mm) swap to Jade White
At layer #18 (0.84mm) swap to Black
At layer #19 (0.88mm) swap to Gray
At layer #20 (0.92mm) swap to Jade White
At layer #24 (1.08mm) swap to Dark Red
At layer #28 (1.24mm) swap to Sakura Pink
At layer #31 (1.36mm) swap to Jade White for the rest.