A simple plug-in system for better lighting inside the printer.
The models that I found were too big for me or lighting should be "complicated" controlled via controller.
I added two options - with an extra routing for using an external cabling and without routing for using the internal USB port.
I use a 8, - € LED Stripe from Amazon glued.
LED: https://www.amazon.de/dp/B0BYNLK4KH
All components are simply plugged together.
The sidebars have several countersinks, in these will be able to be melted into the thread and thus further modifications can be easily added later. I am using the M3 threads from Ruthex (www.ruthex.de).
In addition, I added two vents in the front area to allow for a bit of heat dissipation.
Further extensions, matching the threads on the frame will follow.
-------------------------
❤️ Thanks for ur support ❤️
usually make the designs for myself, I am also happy to make them available... Work doesn't have to be done twice. 🤷♂️
If you like the files and would like to support me a little, I would be thankful 🖖🤓
https://www.buymeacoffee.com/soerenharaldsson