2024/06/17 (V2)
Parametric Model of a Box with Separators.
Feel free to comment if you have any suggestion or request to improve the model.
Boost Me
If you like this model, please give a 👍 And if you feel geneous, give me a boost. It helps a lot. Thank you!
The lid has been designed for an easy snap-on connection.
The tolerance can be adjusted by modifying the parameters of the parametric model.
If printing with a flow rate different from 1, it is a good idea to adjust the lid tolerance.
The size of the box can be adjusted to your needs.
I have also added the possibility to add "watermarks" for the separators on the lid, so the content of each compartment can be written on it.
With the parametric model, you can decide either the internal or external size of the box, depending on whether you need a specific external size for the box or a specific size for internal storage.
You can also decide how many dividers to generate horizontally and vertically.
If you need no separators, the values can be set to 0 and no compartments
You can also decide how many dividers to generate horizontally and vertically.
If you need no separators, the values can be set to 0 and no compartments will be generated.
NEW Feature!
Now span can be defined in customizer. To enable click in “span advanced” checkbox
To define how span must be applied you must modify “span config” parameter
Each block of span config (separated by - ) specify the following data:
Using the example in the above image in a box of 4x3 cells the following span will be generated:
If you like you can check my other parametric models: |
https://makerworld.com/en/models/483859#profileId-396143
https://makerworld.com/en/models/476276#profileId-387207