Jet Engine Clock Multicolor - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Herroc8

Household>Decor

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

12.9 h

4 plates

4.3(17)

Brim + Correct Purge + 0.2mm layer, 2 walls, 15% infill

13.2 h

4 plates

4.9(17)

Hour and Minute Hands (see description for seconds hand)

9 min

1 plate

5.0(9)

Open in Bambu Studio

Boost

290

590

613

220

Released

Description

New Multicolor version of jet engine clock remixed from models by CATIAV5FTW. It has the following upgrades.

In this version fan and cone are mirrored to match clock movement.
Multicolor fan
Spinner can be printed in one piece instead glue the stripe
The nacelle and the stands can be printed in different colors, the old version was design to print with single color change.

Assembly tips:

The numbers fit in an specific blade, so first find the correct place to add the clock mechanism correctly. Use the picture a reference.
You may need to cut clock hands to fit insede the engine
Glue the spinner to the clock the second hand, the cone has gaps in the botton to fit the hand.

For the mecanism i use this one from amazon:

https://www.amazon.es/dp/B0C4TMR43L?ref=ppx_yo2ov_dt_b_product_details&th=1

the model is design for these dimensions. Specially important the 22mm core.

I suppose it can be printed with single color printer spliting the stl and printing separately, but I didn't try it.

Note: the number 1 has a part that may has issues at printing due to a very thin section. Just remove it, the number can be glued to the fan without problem. I will try to solve as soon as possible.

Comment & Rating (58)

@kcrengineer

The print profile is not good. For some reason the multiplier on the flushing volume is 0.00. When you switch colors they completely bleed into each other, especially with a model that has white to black shifts, the gray to black was completely ruined, the gray to white was ruined, and the white to black was ruined. Printed for 8 hours with this profile thinking I had a nozzle with some black partial clog in it or something. DO NOT PRINT MULTICOLOR UNLESS YOU FIX THIS. Big headache and waste of time.

@Kolimax

As someone who worked as an aircraft technician for many years, a project like this has a very special meaning for me. I would also like to extend my sincere thanks to the creator of this outstanding model. I was able to get a clean, trouble-free print overall. I had a bit of bad luck with parts 1 and 2, but the final result turned out great. Also, watching the spinner cone rotate along with the seconds is a unique pleasure.

@MrBadAzzB

Boosted

Print Profile

Hour and Minute Hands (see description for seconds hand)

Great looking Clock, perfect gift from secret santa 🎅

@user_1064194624

Boosted

Print Profile

Hour and Minute Hands (see description for seconds hand)

great print. I combined two of the models because I liked the two tone fan blades, but I liked the other spinner cone.

@user_1064194624

Boosted

Print Profile

Brim + Correct Purge + 0.2mm layer, 2 walls, 15% infill

great print. I combined two of the models because I liked the two tone fan blades, but I liked the other spinner cone.

@Dr.Bendova

Print Profile

Brim + Correct Purge + 0.2mm layer, 2 walls, 15% infill

high quality and very fun to build,.the fan looks so dam good!

@user_2905677831

Print Profile

Hour and Minute Hands (see description for seconds hand)

Awesome matched Co color, Fan blade leading edges were rough but maybe because of BBL Silk and my settings. All PLA , painted inside of inlet matte silver . Clock shaft was a little short but worked just couldn't use hangar, used US Amazon link. love hoe spinner turns with second hand. Daffy is mad it took his place on the desk.