A1/A1 mini Extruder Cooling Fan Lightweight
Print Profile(1)
Description
As the weather gets hotter, the printer's extruder may overheat, affecting extrusion stability. This is a modification to the fan housing, making the housing lighter and ensuring that the stability of the x-axis is not affected by the installation of the fan.
Buy a 4010 fan, 5v or 12v fan with a USB interface cable, it costs about 5 yuan.
Cut off the fan.
Use glue to stick it to the printed base, then stick the base to the snap-fit designed by netizens. Link https://makerworld.com/zh/models/464018#profileId-372697 There is also one that snaps onto the top of the extruder. Link https://makerworld.com/zh/models/468727#profileId-378039
When gluing, pay attention to the direction of the snap-fit and the direction of the wire, and also glue the wire to prevent it from interfering with the fan.
Weight before reduction: 8.2g, Weight after reduction: 1.7g, Weight reduction percentage: 80%
Hurry up and install it on your printer, you can print happily even in summer! b
License
Comment & Rating (1)