Strong Slingshot for 6 Rubbers - Free 3D Print Model

Search models, users, collections, and posts

Odei

Toys & Games>Outdoor Toys

IP Report

Print Profile(3)

All

H2D Pro

P1P

H2S

P1S

A1 mini

X1E

H2D

X1 Carbon

P2S

H2C

X2D

A2L

0.16mm layer, 5 walls, 50% infill, PETG

Designer

11.9 h

1 plate

4.9(9)

0.16mm layer, 5 walls, 50% infill, PLA

Designer

11.5 h

1 plate

5.0(4)

0.2mm layer, 2 walls, 15% infill

2.7 h

1 plate

5.0(8)

Open in Bambu Studio

Boost

111

257

357

135

Released

Bill of Materials

Bambu Filaments

Select all

PLA Basic

Description

I've used these rubbers: https://amzn.to/4dnZbLg

But these should also work: https://amzn.to/4ba8gFW

You can also use the ones with 4 rubbers and just leave one empty hole in each side (I suggest the middle one).

I printed it with PETG, but after printing and testing, most probably PLA would also work. Let me know in the comments/makes.

Print HORIZONTALLY to increase strength/resistance.

Layer height: 0.15
Line width:
- Default: 150%
- First layer: 100%
- Outer wall: 100%
- Inner wall: 0
- Top surface: 100%
- Support: 100%
Wall loops: 5
Alternate extra wall: Yes
Top shell layers: 5
Top shell thickness: 1
Bottom shell layers: 5
Bottom shell thickness: 1
Infill density: 50%
Infill pattern: Cubic
Support: Yes
Support type: Tree
Support angle 30

slingshot

tirachinas

slingshots

Comment & Rating (45)

@tepsley

Boosted

Print Profile

0.16mm layer, 5 walls, 50% infill, PETG

Didn't think to take a picture before the "dress-up" but i went with PETG / 8 walls / 50% infill and this monster is around ~350g 💪🏼 Thank you!

The profile uploader has replied

@odeialba

Thank you so much for the review. It looks awesome!!!! I would also greatly appreciate a boost!

(Edited)

@tepsley

Boosted

Replying to @odeialba :

Done :)

(Edited)

@Stacon1964

Boosted

Top 👍🏼

The designer has replied

@odeialba

I love the result. Can I add the picture to the ones in the model?

(Edited)

@Stacon1964

Boosted

Replying to @odeialba :

Of course

Show original

@NeXuS82

Print Profile

0.16mm layer, 5 walls, 50% infill, PETG

I made a real big boy out of it

The profile uploader has replied

Show original

@odeialba

Thank you so much for the review. Damn! That one looks insane! With six bands is already hard to pull it back. I can't imagine with eight bands. That gives me the idea of modifying it and uploading a new model for eight rubber bands. I would also greatly appreciate a boost!

(Edited)