2023-2024 Hyundai Palisade Dash Phone Mount - Free 3D Print Model

Search models, users, collections, and posts

eclien

Hobby & DIY>Vehicles

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 15% infill

Designer

4.8 h

3 plates

4.8(6)

Open in Bambu Studio

Boost

172

124

Released

Description

This is my design for a 2023-2024 Hyundai Palisade Cell Phone Dash Mount. I have a few versions included:

Smooth Magsafe
Ribbed Magsafe
Universal M5 Bolt Pattern Backplate (for you to use as backplate to make your own variation)

I used this Magsafe Puck in my design. Presses in with my printer and settings with an interference fit: Magesafe Puck

I also used this Motorola MA1 to get wireless android auto so now I am totally free from wires: Motorola MA1

I have included STEP and STL for each version. Plus the native CAD file below.

Onshape native file: https://cad.onshape.com/documents/39aaa17fe3a70b9f13986350/w/f00b89edf049c863b481322c/e/f5d9caefbace222779366afb?renderMode=0&uiState=6637f119e274c9461777f5d9

And a video of it snapping in (you can use a small square of 1mm thick VHB to add to the holding power of the integrated locking fin (see image above for location):

Comment & Rating (32)

@sradab68

I remixed it a bit to fit my old phone holder. ( https://www.amazon.com/dp/B07SN3DKSV ) I could have done it properly and removed the void for the magnet but I did it quick and dirty and just added the ball and stem in the center of the void. I printed mine in ASA. Ignore the line artifact in the print as apparently one edge lifted on the print and the extrusion head tried to smoosh 3 or 4 layers onto one bouncing edge. This fits my 2025 Pali. I also removed a bit of the width at the bottom connector so I could slide the edge a little further over towards the speedometer opening and away from the center screen a bit more. I'm driving it with it like this for the weekend but will likely shorten the stem a bit so It's not right behind my wiper control so much.

(Edited)

The designer has replied

@eclien

Looks great, I love when people remix and make it work for them just the way they want. If you go for a version 2 and need a little help on anything let me know. I always like small modeling projects. And thanks for sharing your print.

@sradab68

Replying to @eclien :

Thanks. Yeah I could really refine it for my ram mount use case but I'm headed out of town for a few day road trip, I just got my Palisade and wanted somewhere to put my phone and charge it because the wireless system it has is basically just a phone heater. After a weekend of driving I'm sure I'll have some refinements but like I said I just needed quick and dirty for now. I added a remix in case anyone has the same holder as me. And thanks for offering to help and posting your onshape document. You do some pretty awesome designing.

@s3rg3y

doesn't work for the Palisade LX2 (2018). it's bigger than the screen. also screen has no space to insert holder under it

(Edited)

The designer has replied

@eclien

yeah, unfortunately it only works on the newer models. and it looks like they're going to update it again so it probably won't work on those either. sorry, I don't have other years to measure to make alternate versions. it took a bit of fiddling in CAD to get it to work on my model year.

@user_2065923034

this looks like it might work in the 2023+ Kia Sportage as well! excited to try it out!

The designer has replied

@eclien

let me know how it goes!

@user_1390719509

Boosted

Very Elegant print. Works great, although Magsafe charger magnet not very strong. Had to change phone case. I had another charger that was a little larger, but much better magnet. Still strongly recommended. Printed a second for a friend.

@user_1364015993

Print Profile

0.2mm layer, 4 walls, 15% infill

weight of iPhone was a little too much for my MagSafe so added a ledge at the bottom to support phone. works great.

The profile uploader has replied

@eclien

I'd love to see your modification. I'm always looking for ways to improve the design.

@user_1364015993

Replying to @eclien :

Here is my slight mod. My Palisade is 2020 model.

(Edited)

@goofoo2

Replying to @user_1364015993 :

I printed the original model but like you my phone is to heavy to stay on the magsafe. I like the idea of the shelf so could you post your model for download?

(Edited)

@S.RossEdition

Where and how did you route the wires for the charger? I want as clean of a look as possible

The designer has replied

@eclien

I ran it down to underneath the center foot well area where there's two USB ports. I wedged the wire in between two panels.

(Edited)

@eclien

down here

@user_495188641

Print Profile

0.2mm layer, 4 walls, 15% infill

Printed great. I have 2020 but if it will not fit I will give it to someone else

@Tskog

Did it fit?

@user_495188641

Replying to @Tskog :

It did but I wound up not using it. I didn't want to use the tape on the dash.

(Edited)

@InfamousInc

Boosted

Printing this now and boosting already! +1 for sharing something that many people may not known is out there but solves an amazing issue I have had with our new Palisade. Props to you!

The designer has replied

@eclien

Great to hear you find it useful. I have been loving mine in that location. FYI I ended up putting some high temp double sided tape on the backside of the magsafe puck after a couple months to keep it firmly inside the print. It fits tight, but on a hot summer day the CF-ABS expands just enough the puck can occasionally pull out when taking the phone down. Thanks for the Boost.

@InfamousInc

Boosted

Replying to @eclien :

Good to know, and noted! I’ll see what I can get, it came out beautifully and I printed in PETG so we’ll see how it turns out in the Alabama heat!

@user_26818200

Any chance you could make this for a 2022?

The designer has replied

@eclien

I don't have a 2022, so I unfortunately don't have a way to get the dimensions to make it fit.

@ms_rock_city

Boosted

Print Profile

0.2mm layer, 4 walls, 15% infill

printed great! fits perfectly! thanks so much for sharing. I printed in pla but will probably reprint in a more heat durable filament closer to summer

The profile uploader has replied