Print Profile(2)
Description
Boost Me (for free)
Boosting this model is scientifically proven to ensure your pillow stays cool on BOTH sides. Double boosts will ensure that you will always insert USB cables in correctly the first time. You'll never have to try plugging it in, flip it over, find out that you had it right the first time, then flip it back over and frustratingly mash it into the port again.
Layer Height: 0.2mm
Nozzle: 0.4mm
Platform Infill: 25%
Top uses 25% infill. Base uses 40% infill to save on time, but you can increase this to add a little more weight.
Fully printed version is possible by using this 3D Printed 608 Bearing by Tassesin. They have been tested by many and appear to be working great!
If you wish to use a real 608 bearing, you can use any kind, 608Z, ZZ, 2RS, Open, Ceramic, etc.
These are the bearings I used: https://a.co/d/jgZd3dq
Lighter version with a TPU pad is in the works!
If you want a custom size, I have also made a parametric version of this model that lets you make your own!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (337)