Customizable Lazy Susan (Make your own!)
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
Boosts highly appreciated, it's free!
This model is a ground-up redesign of my Lazy Susan model, which was designed in Fusion. This was built from scratch using OpenSCAD to be easily customizable using MakerWorld's editor. They are completely different models, and measurements, so if you're familiar with that model, this may have slightly different tolerances, but the concept is the same.
Fully printed version is possible by using this 3D Printed 608 Bearing by Tassesin. They have been tested by many and appear to be working great!
If you wish to use a real 608 bearing, you can use any kind, 608Z, ZZ, 2RS, Open, Ceramic, etc.
These are the bearings I used: https://a.co/d/jgZd3dq
Items to note:
- The fit is very tight, and everything is press fit. I've printed with multiple types of filament and they all print great using my P1S. If your printer isn't calibrated well, then you may experience issues.
- If you print this on an A1 Mini, then you will have to move the parts around in the slicer to make them fit, or even print the pieces separately.
- The maximum size you can print all parts on one bed (Using an A1, P1 or X1) without splitting them up is 180mm. Any larger and you'll have to split them up.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)