Heavy Early

cover

20240225_213219_f99d5b60-c6a7-4192-b1fd-4ec69bff1b6e.jpg

20240225_213930_a3545642-4695-4850-bd47-48464becb91c.jpg

plate_1.png

20240225_214952_17ddfeed-c096-45be-9276-88042d87dced.webp

20240225_213333_ec1943bc-d010-443b-924c-f3dc0b03020b.webp

0.2mm layer, 3 walls, 15% infill

Top and Spring (PLA)

Base

plate_2.png

TPU Stuff

plate_3.png

ModerationMike

Screenshot 2025-12-08 234531.png

Print Profile for the A1 Mini. &nbsp;*Plate 3 is optional - it contains TPU versions of the spring and button/stopper.  For a softer TPU, use the more rigid spring designs.

A1 Mini - 0.2mm layer, 3 walls, 15% infill

Screenshot 2025-12-30 192442.png

20251230_192546.jpg

20251230_192531.jpg

Thicker walls and much taller collar where the lid and base come together to prevent leaks. Also made the base bigger to hold more water.

Updated Bucket - Larger Volume, Thicker Walls, Better Seal

Hard

Stiff

Supple

Flaccid

plate_4.png

20251208_205038.jpg

Screenshot 2025-12-08 231914.png

TPU springs for the drainage button!  &nbsp;I&#39;ve included several versions with varying levels of rigidity and structure to be used with a variety of TPU shore hardnesses. &nbsp;The stiffest one has been tested with 90a TPU - it seals well, but requires firm pressure to drain.  Use your best judgment.

TPU Springs! 0.2mm layer, 3 walls, 50% infill

Screenshot 2025-12-08 235657.png

Bob in Color AMS - 0.2mm layer, 3 walls, 15% infill

1000009950.jpg

1000009949.jpg

1000009947.jpg

Made a gasket to prevent water from leaking out between the lid and bowl.  Will probably remix the lid to ultimately fix the problem.  &nbsp;If anyone else wants to take a stab at it - the issue seems to be the flat bottom on the top part. The water clings to it and crawls to the edge. The bottom needs to be convex (the edges need to be above the center).

Prevent Leaks! TPU Seal 0.2mm layer, 2 walls, 15% infill

https://www.printables.com/model/649790-water-dispensing-paintbrush-cleaner-push-button-mo

Added base to reservoir with holes for magnets. Made push button taller. Filled in extra square holes under the lid. Added Bob Ross SVG, text to reservoir. Added text to brush bath for texture.&nbsp;I only remixed this…just added a cylinder to make the button taller; As-is it leaks and needs some kind of seal. I was able to use a small rubber band.

Water Dispensing Paintbrush Cleaner-Bob Ross Remix

ASIA

Print Profile(6)

Description

Comment & Rating (42)

This remix is based on

License

Related Models