Sentinel of Light VANDAL VALORANT Cosplay (LED)
Print Profile(1)
Description
Has a hole for 5mm ( 3/16") steel pole dodwn the handle and up the whole model for reinforcements, also includes holes at joints for filament guides. It's a little hacky of a project as it was designed for 3mm LED's , but 5mm LED's work as well, I would recommend having a 3/16 drillbit or slightly bigger ( or print at 101% maybe? ) because the poles are really tight to put in ( you dont want them to be too loose ) , and if you want 5mm led's just drill the 3mm holes bigger , model has a channel down the middle and to the magazine meant for wiring + battery in the magazine + switch on magazine. magazine might be best printed @ 97-98% if you don't want to put in manual work.
Recommend using silk purple ERYONE filament as you won't need to paint the base colour.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)