Leaf soap dish - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Fraoch

Household>Decor

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 5% infill

Designer

2.1 h

2 plates

4.9(91)

0.2mm layer, 3 walls, Arachne, 15% gyroid infill, ironing

9.7 h

4 plates

5.0(3)

Open in Bambu Studio

Boost

340

743

129

1.1 k

764

Released

Description

Full attribution to cecca_7 who won a contest for this beautiful model. https://www.printables.com/model/215518-leaf-soap-dish

It's a leaf soap dish in two parts. The design allows water to drain off and the inserted portion is elevated off the bottom by a tiny margin to prevent the insert from sticking. It fits a standard size bar of soap but this was intended for a nail brush, which fits well.

It's quite beautiful and intricate.

I've resized it to 80% of the original size, which was far too big, and reoriented the insert so that it will print properly - one side of the insert isn't flush and if you print it with this side down, the print will fail.

You can print it smaller, but not too much smaller - the leaf vein insert design is quite intricate and as it gets smaller, you may have problems with every line adhering to the bed.

Here it's printed in CC3D grass green PLA MAX for the base and FF SUNSENKJ translucent green PLA for the insert.

Comment & Rating (129)

@Hans93

Print Profile

0.2mm layer, 2 walls, 5% infill

todo perfecto

(Edited)

The profile uploader has replied

@Fraoch

Looks great!

@Farukhlab

Boosted

easily printed from Bambu Handy App. great model, thanks to the creator.

The designer has replied

@Fraoch

Thank you for the boost!

@RH_3DARTs

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

Sehr gut 👍

The profile uploader has replied

@Fraoch

Looks great, and thank you for the boosts!

(Edited)

@MAGNO.THE.BEST

Print Profile

0.2mm layer, 2 walls, 5% infill

Nice print! 🙂

The profile uploader has replied

Show original

@Fraoch

Yes, looks good!

@Schichtweise_05

Print Profile

0.2mm layer, 2 walls, 5% infill

Very nice, thank you for sharing

The profile uploader has replied

Show original

@Fraoch

Nice colour combination, great-looking print!

@3dprintinglover

Print Profile

0.2mm layer, 2 walls, 5% infill

Based on the color of my syngonium infra red, I used PETG Translucent pink and PETG Translucent olive to print, which come out perfectly. I love it! 🥰

The profile uploader has replied

@Fraoch

Fantastic colour combination!

@halthan_labs

Print Profile

0.2mm layer, 2 walls, 5% infill

Love these! Great print and style! The results are amazing using Bambu PLA basic green and a Creality matte spring green for the inside. Makes a great gift for friends. Off white/bone white PLA for the outside and bronze for the inside looks great too! I shared an alternative print profile with a recessed inner leaf to make it easier to clean from soap residue buildup.