Soft Jaws - Double V Grip - 2.5", 3", and 4" - Free 3D Print Model

Search models, users, collections, and posts

ChopperOriginals

Tools>Hand Tools

IP Report

Print Profile(3)

All

P1S

H2D Pro

X1 Carbon

A1 mini

H2C

P1P

H2D

H2S

X1E

P2S

X2D

A2L

3 Sizes, 3 Plates, 0.2mm layer, 4 walls, 85% infill

Designer

7.3 h

3 plates

4.9(24)

Adjustable Magnet Sizes, 0.2mm layer, 4 walls, 85% infill

Designer

6.5 h

3 plates

5.0(6)

0.2mm layer, 4 walls, 30% infill

38 min

1 plate

4.9(7)

Open in Bambu Studio

Boost

292

1024

821

488

Released

Description

All Compatible Lightbox Frames & Mounts Available Here!

🛠️ Recommended Gear

Check out my Amazon Storefront by clicking here!

Bed Adhesion (Fix First Layer Issues) Magnets (for optional mounts)

Custom One-Off Designs Available - CLICK HERE

Printing tips are located at the bottom of this listing

___________________________________________________________________________

Here is a set of Double V-Grip soft jaws I made. Great for holding round stock vertically or horizontally. I made a set for each vise I use daily. 2.5" Yost, 3" Yost, and a 4" Morgan Chicago 40. They are sturdy and hold up well at least so far. As a knife maker, I often find myself looking for something to hold work without marring it.

Each set has a recess for magnets. The 2.5" and 3" take 8x3 mm magnets found here https://amzn.to/41eXpav and the 4" takes 12x3" magnets found here https://amzn.to/3POMMJ8. All can be found at local craft or department stores as well as Amazon. I left the recessed areas a tight fit on purpose. I did not want to rely on glue. I heated the holes with a lighter and then pressed them in with my fingers. Finished pushing them immediately in the vise. Worked great!

Be sure to check my other things. I have a smooth set and a textured set coming as well.

Print Settings

Printer brand: Creality
Printer: Ender-3 V3 KE
Rafts: No
Supports: No
Resolution: .40
Infill: 85
Filament brand: Creality
Filament color: Black
Filament material: PLA
Notes:

***Note the infill. I printed with 85% Gyroid infill and 4 walls. Took a little longer but they should hold up much longer this way.

_________________________________________________________________________________________________

Thanks for downloading from Chopper Originals.

If this print earned a spot on your printer and you’re out of Boosts, consider buying me a coffee ☕ to help support future designs and releases.

___________________________________________________________________________________

Affiliate Disclosure
Some links in this listing are affiliate links. As an Amazon Associate, I earn from qualifying purchases at no extra cost to you.

____________________________________________________________________________________

Having issues getting that first layer to flow and stick good? Follow these steps, it helps! ***If using an enclosed printer, be sure to remove the lid and leave door open to avoid heat creep***

If using multiple brands/types of filament, you will need to save each as a Custom Filament setting. Otherwise the settings will change when your colors switch.