Universal AMS Small Spool Adapter - Final Edition - Free 3D Print Model

Search models, users, collections, and posts

abactor81

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

9.3 h

3 plates

4.9(337)

adapter for a 75mm inner diameter spool.

Designer

3 h

1 plate

4.8(4)

Saves hours of print time due to changed spool design

6.6 h

4 plates

4.7(13)

Modified Spacer Rings (Filament Jump Protection)

3.8 h

3 plates

Open in Bambu Studio

Boost

646

1705

822

291

3 k

2.2 k

Released

Description

Ultimate adjustable universal adapter for inserting all small spool into AMS, compatible with spool of any size less than 1kg, allows you to use 200g, 250g and 500g spool with AMS.

Internal hole compatible from 40mm to over 55mm.

If you liked my work, you can support me with a boost to help me create new projects.

Adattatore Universale regolabile per inserire bobine piccole in AMS, compatibile con bobine di qualsiasi misura inferiore a 1kg, consente di utilizzare con AMS bobine di 200g, 250g e 500g. Compatibile con foro interno da 40mm ad oltre 55mm.

Se ti è piaciuto il mio lavoro, puoi supportarmi con un boost per aiutarmi a creare nuovi progetti.

Comment & Rating (822)

@earthruby

Boosted

I have printed the 40-55 adaptor for my 200g spool. the spool adaptor fits my small spool but doesnt fit the AMS. after inserting the spool adaptor, the whole spool is wider than the slot in AMS which I have to occupy some of the spaces in slot 2 to use it. am i doing something wrongly with this adaptor?

The designer has replied

@abactor81

Hi, it's mounted badly this way. What is the internal diameter measurement of your spool?

@earthruby

Boosted

Replying to @abactor81 :

the diameter is 55mm… the adaptor actually cannot go through the spool..

(Edited)

@abactor81

Replying to @earthruby :

You must first screw pieces 1 and 2 to the end, then tighten the spool with ring no. 3. if the diameter is 55mm and it doesn't fit all the way into the spool to close it all the way, use the 40 to 50 adapter. Let me know if you can solve the problem. Thank you.

@user_82107165

Excellent and useful design. I have many small spools of filament i can now use without a problem in my AMS. Pro tip, print out 2 sets of rings. This allows you to center the spool in the adaptor. Thank you!

The designer has replied

@abactor81

thanks

@TheCraftyBear

Print Profile

0.2mm layer, 2 walls, 15% infill

This was so helpful I made an extra spacer to be able to get the filament to be directly in the center. Worked so well!! Thank you very much.

The profile uploader has replied

@abactor81

thanks

@user_1929444302

Print Profile

0.2mm layer, 2 walls, 15% infill

I used PETG materialsnd it great and went together with no issues, i printed extra spacers to keep the spool centered.

The profile uploader has replied

@abactor81

thanks

@megullicious

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

great print, and now I can more easily use all these no-name filament spools I've accumulated! the spools actually stay put on the adapter without rigging something up with zip ties as I've had to do before 😅

The profile uploader has replied

@abactor81

thanks

@3DPbyTurboIT

Boosted

Love mine. I had someone argue that 195mm would scrape in the AMS but i never saw it... just in case i may rework to 200mm. I also will add a few filament clips to the male threaded side which I determined due to thread direction, would be the correct side to be the right side in the AMS. I also made a 55mm half thickness ring as I needed a solution for 600g Flashforge PLA spools which are a very awkward size. Too fat for the normal thickness ring and too small a diameter to run on their own... I've since printed some adaptor rings for that spool anyway, but worth a mention.... Great adaptor though and I am printing a couple more as I have lots of 200 and 250 spools and this simple works brilliantly.... Thank you... I boosted after my first use over a month ago and now boosted again.... I love this so much

The designer has replied

@abactor81

thank you very much ;)

@sisterhide

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Best adapter spool yet, I won't print any other anymore! Thanks for sharing the model It is also heavy enough not to jump in the AMS 👍

(Edited)

The profile uploader has replied

Show original

@abactor81

thanks

(Edited)

@user_1354498251

Boosted

Great part... I printed a second nut and now the 250g spool is centered

The designer has replied

Show original

@abactor81

thanks

@user_3479720011

Print Profile

0.2mm layer, 2 walls, 15% infill

The print worked very well. All threads run perfectly. I printed a second 55mm ring to fix my small leftover spools in the middle of the large spool; the filament is then processed straight in the AMS. Thank you very much.

The profile uploader has replied

Show original

@abactor81

thanks

@papagalo79

Boosted

Perfect. Exactly what I needed.

The designer has replied

@abactor81

thanks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.