Escudo FC Barcelona Mini Lightbox - Free 3D Print Model

Search models, users, collections, and posts

BS 3DPrint

Household>Decor

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 2 walls, 15% infill

Designer

2.2 h

2 plates

4.3(12)

Open in Bambu Studio

Boost

116

201

529

Released

Description

Mini Lightbox de menos de 12cm de altura inspirado en el escudo del FCB (Fútbol Club Barcelona).

Requerirá el uso e instalación de:

Tira led de color blanco frío (yo uso de 8mm y 5V).
Interruptor de 10x15mm de dos puntos.
Cable USB para su alimentación (incluye agujero de 3,3mm de diámetro).

Suelo subir perfiles de 0,2 y 0,4 para aumentar el detalle ya que yo imprimo la carcasa en 0,4 y la parte del escudo en 0,2, pero en este caso no ha sido necesario hacer de 0,2mm.

Comment & Rating (19)

@Joagmo

Print Profile

0.12mm layer, 2 walls, 15% infill

Impresionante

@icks99

Print Profile

0.12mm layer, 2 walls, 15% infill

The print profile for this model is bad, it gives a catastrophic result. I printed another model titled Barcelona Light Box, which printed a 20cm full-size model and I had no problems. So there is indeed a defective profile issue with this mini light box model

Show original

@icks99

I have tried several times to print on a p2s, even reducing the speed, but the result is horrible. Is there a setting to adjust in Bambu studio when opening the file?

Show original

@PierTrois

Print Profile

0.12mm layer, 2 walls, 15% infill

👍🏻

@LaGuadidaTresD

hello what colors did you use for the shield exactly

The designer has replied

Show original

@BS3DPrint

You have them in the AMS description

Show original

@LaGuadidaTresD

Replying to @BS3DPrint :

Yes, but I'm not sure if it's earn it or wine

Show original

@JulenAro

Print Profile

0.12mm layer, 2 walls, 15% infill

Nice model.

@marekneo2

The project should be limited to printers supporting 2 AMS.

@rosu

Hello, it's impressive but the problem I have is that I don't know how to change filaments, I have a Bambulab X1 Carbon with a 4-color AMS, can someone help me please

The designer has replied

Show original