Crocs Shoes - Fully 3d-printed by MakerVerse Designs

MakerVerse Designs

Fashion>Footwear

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

WithSupport - 0.2mm layer, 2 walls, 12% infill

Designer

27.9 h

4 plates

4.8(154)

WithoutSupport - 0.2mm layer, 2 walls, 12% infill

Designer

26.7 h

4 plates

4.8(119)

EU45 fully scaled fits X1, P1, A1 series - better settings!

38.8 h

4 plates

4.9(29)

Mini Crocs (1pcs, 25% size)

28 min

1 plate

4.6(15)

Click to see more

Open in Bambu Studio

Boost

2652

3958

574

383

5.9 k

2 k

Released

Description

Fully 3d printed crocs shoes

Printed with Overture TPU
PLA for the snap button

Important notes:

It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)

If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed
- I uploaded an .stl file without cut on the bottom for better scaling

There are two ways to print this:

Use a textured PEI bed and print it standing up without support
Or use another not so sticky bed and print it standing up with support

If you can't get enough of printed shoes, check out my new model (Slide Shoes, Adilette):

https://makerworld.com/en/models/488792#profileId-401842

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.

Comment & Rating (574)

@Thanhduyenl

Boosted

I just printed mine and I normally usually doesn't write review nor rating much. But I must said " this print is awesome" It fit really will and print very clean. I love it and will take it out for a walk tomorrow to see if it comfortable or not. Where can I put 5 stars for this print?

(Edited)

@ClausRathberger

Can you please let us know what filament brand this is? Looks awesome… 😀

@EVERYTHINGPLUSU

what infill type and % ? does it flex well with your foot pressure?

@Thanhduyenl

Boosted

Replying to @ClausRathberger :

AMOLEN TPU Flexible 3D Printer... https://www.amazon.com/dp/B0CHW3CB29?ref=ppx_pop_mob_ap_share

@enteriusz

Print Profile

WithSupport - 0.2mm layer, 2 walls, 12% infill

Printed in eSun Rainbow TPU-95A. It's great!

@lucian.novo

oh where is this filament available? Here in the US I can't see it on the esun store or amazon.

@enteriusz

Replying to @lucian.novo :

I bought it online but in our "Polish" amazon. It's called Allegro. Anyway, I couldn't found it on other sites by its name "eSun Rainbow TPU-85A" but after pasting it's SKU in google, many shops pop up. Try to search this in google: 6922572201866. Hope you find it in the US.

@mrkira

I found and ordered the same type of plastic as you have. Could you tell me the profile settings you used? Generic TPU? Did you change anything in it? I have a Bambulab X1 Carbon. I want to try printing it as well! Thanks in advance.

@rna_parts

I recently printed shoes using black TPU and the results were surprisingly excellent, especially since I didn’t use any supports. The TPU adhered really well to the textured sheet, and I was impressed by the high quality of the print.However, the comfort level of these shoes isn't quite there yet. I made them slightly larger than recommended, so the fit was perfect and they easily accommodate wide feet, which is great. But, the top part curves in such a way that it uncomfortably presses against my toenails. I wore them for a whole day just to be sure, and they definitely weren’t comfortable, although still usable. My wife also tried them and noted that they don't feel like Crocs, which she thinks are like walking on air.I’m not complaining, though; I'm really thrilled to be able to print wearable shoes. It’s still a fun and impressive project. Now, I just need to tweak the design to improve comfort. Love working with TPU!

@WingArt

I think the main problem is the stiffness of the TPU itself. First i tried to print with 85A, but i stopped because the print wasn’t as nice at the pictures here in the comments. Then i printed 95A and it works fine, but they are a bit too hard. Nonetheless i really love em, because an many year old dream came true with printing the shoes. So a big thanx to the designer for the idea!

@basssedir

I wonder if scaling the z axis to 110% or more would give you the toe comfort you desire. plus you can use a shoe stretcher and a heat gun or hair dryer to stretch them.

@evilinheaven

Replying to @WingArt :

I am printing with 83A, but I only have transparent. The result is not pretty, but I think it will be more confortables. I am using supports and need a way to get rid of the zits and blobs of the print.

@Kobi3D

Print Profile

WithSupport - 0.2mm layer, 2 walls, 12% infill

They’re gaudy and cringy, I love them so much!! Great file, really easy to print on the A1, amazing work desiging the file!

@Infinity3DPrint

Print Profile

WithSupport - 0.2mm layer, 2 walls, 12% infill

went with 2 walls and 10% gyroid and it’s the perfect squish . I call these the safety crocs

@kshipp

how have they held up in a month? what filament did you use? planning to use your settings but might up the wall count to 3 so they might last a little longer and afraid I’m gonna lose the “squish!”

@namroevets

Boosted

Print Profile

WithSupport - 0.2mm layer, 2 walls, 12% infill

This is a great model and a really good print profile. I had to enlarge to 110%, so that also meant rotating the toe down slightly so it would fit inside the build volume of an X1C. I also moved the Z down a bit below the plate so that it recreated the flat part on the heel that was created because I had to rotate. The print came out amazing and I honestly think this might be a viable footwear for many occasions. The best part is you can customize each foot!

@OzButcher78

nice! love the colour. what filament is this? and what shoe size did it match to for you?

@namroevets

Boosted

Replying to @OzButcher78 :

It's Inland translucent purple from Microcenter. I matched it for about a size US 12.5-13.

@Maniraj

hello I don't understand how you print in TPU on the bambulabs, shouldn't we go through AMS?

@user_515549446

Print Profile

EU45 fully scaled fits X1, P1, A1 series - better settings!

prints perfectly for me (size 11 US)

(Edited)

The designer has replied

@NxtGnPrtHub

Thank you for your rating!

@truestory

what scale did you use for us size 11?

@user_515549446

Replying to @truestory :

didn’t need to scale at all for this print profile (45 euro = 11 us)

@Spamuel

I saw this filament before knowing what to do with it, and then I found the model that evening... With 15 hours to spare they made their debut at RMRRF! They were a huuuuge hit!!!!! Super kudos to you, such an easy print and so easy to size! Im wearing a 10 1/4! The larger size maxed out my build height so i just tilted them 2 deg forward and dropped them by ~1mm. Lost a fraction more of the heal. Printed in Inland TPU at 70mm/s, 0.28mm layer height, 245deg. Front shoe I tried printing at 5 walls, but that was totally unnecessary and it didnt show off how cool this transparent filament was (but admittedly do look "nicer" in general)

@christopherd

15 hours？this fast?

@Spamuel

Replying to @christopherd :

oh, no. like I had finished these 15 hours before going to RMRRF. it took about 23hr per shoe at 70mm/s

@christopherd

Replying to @Spamuel :

gotit. IT looks amazing

@EVERYTHINGPLUSU

Print Profile

WithSupport - 0.2mm layer, 2 walls, 12% infill

printed great, couldn't get the scale right, it was very big for my daughter, but also very stiff with no comfortable flex, maybe gyroid is not the best infill ? printed design is great though thanks

@CataCoop

everyone is printing it for their daughters, why not their sons?

(Edited)

@alanteew

Boosted

It would be great to hear what others have tried, or perhaps a mix of infills using a modification objection. You could also stiffen the sole with an interior layer of pteg and use a software PLA overall.

(Edited)