X1 Extra Nozzle Wiper A1

Search models, users, collections, and posts

woozle

3D Printer>3D Printer Parts

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

PET-CF X1C 0.4 - 0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

4.9(42)

PETG 0.2mm layer, 2 walls, 15% infill

27 min

1 plate

4.2(9)

ASA, 0.2mm layer, 2 walls, 15% infill

26 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

218

417

290

Released

Bill of Materials

List other parts

Heatbed Nozzle Wiper - A1 x 1: https://store.bambulab.com/products/heatbed-nozzle-wiper-a1?_pos=3&_sid=c2afd6cd5&_ss=r

Description

I've tried about a half-dozen different wipers, and they all had pros and cons. This one combines several features found in other designs but has been redesigned from scratch in CAD.

This design uses an ~11mm cutting from an A1 nozzle wiper. (The wiper's adhesive backing should be fine, but add a dab of super glue if you want it to stay for good!
The extra wiper is positioned to the right of the stock X1C nozzle wiper, which remains in its usual place. Get the benefits of both wipers!
Placing it to the right won't be in the way when the nozzle comes to rest before and after the first layer inspection and during filament changes. This means there shouldn't be any build-up of purged filament getting stuck between the stock wiper and the additional A1 wiper, as is the case in versions where the extra wiper is placed to the left.
This design has a lot of inherent stability by filling the full purge chute area. I've added an optional screw hole on the right side, for added stability. You can re-use the existing screw located in this position.
The extra nozzle wiper is well supported along the edge of the purge chute frame, making it unlikely to shift during prints.

I'm happy with how this turned out. I've successfully printed it with ABS, but I recommend a material that maintains rigidity at higher temperatures. I've also printed it with PET-CF, and it worked very well!

Enjoy!

Part needed:
Heatbed Nozzle Wiper - A1 - https://store.bambulab.com/products/heatbed-nozzle-wiper-a1?_pos=3&_sid=c2afd6cd5&_ss=r

Comment & Rating (84)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.