Raspberry Pi 5 PoE NVMe Case | Waveshare/Pimoroni

A Raspberry Pi 5 case custom designed for this stack featured in Jeff Geerling's video:

• Waveshare PoE HAT (F) for Raspberry Pi 5
• Raspberry Pi 5
• Pimoroni NVMe Base for Raspberry Pi 5

Features

• VESA 75x75 mm mounting holes on the bottom of the case
  • Easily mount the case to the back of a TV, monitor or a wall
  • For a space efficient mounting solution, try my VESA to DIN Rail adapter
• Hexagonal holes pattern for plenty of ventilation
• Screwless mounting of the Pi stack
  • No need to take it apart! Just slot the bottom of the NVMe base into the indentation in the bottom of the case and put on the top
  • The Pi stack will be held in place by the four stalactites positioned over the PoE HAT's screws

Parts needed

• 2x M3 hex socket screws (DIN 912)
  • Any length from 12 mm to 25 mm will work. I used 20 mm myself
• 2x M3 threaded heat set inserts
  • The ones I used were 3 mm long

Notes

The print shown in the photos was printed at 0.2mm layer height using Creality white PETG on a Bambu Lab P1S

Tip jar

If you found this design helpful, please consider buying me a coffee - always appreciated!