cover

IMG_2008_3028c76c-4246-4555-8d32-0acb28eee767.jpeg

Panel

plate_1.png

Plugs

plate_2.png

IMG_2007_1848494c-9582-422e-9e97-bf0a73df6801.webp

plate_1.webp

plate_2.webp

0.2mm layer, 4 walls, 10% infill

Panel-TopLeft

Panel-TopRight

Panel-BottomLeft

plate_3.png

Panel-BottomRight

plate_4.png

plate_5.png

IMG_3129.jpeg

IMG_3131.jpeg

IMG_3133.jpeg

<p>This version is based on the idea to split the panel up for printing on the A1 Mini by <a target="_blank" rel="noopener noreferrer" href="https://makerworld.com/en/@derpydavy">@derpydavy</a>. Be aware that the plugs might be a too tight fit. I had to sand the holes a bit to get them in. You could also scale them down to 95% just to be safe.</p>

<p>For the panel use honeycomb pattern and 10% (or less) for sparse infill and zero bottom and top layers</p>

Ikea Vappeby Front Panel

First_Liar

PXL_20250310_085850841.MP.jpg

PXL_20250310_085922087.MP.jpg

Vappeby Frontplate with Speaker-Holes

ASIA

Print Profile(2)

Description

Comment & Rating (20)

License

Remixes (1)

Related Models