Search models, users, collections, and posts

Fanatec CSL DD Cable Cover

AngryPearl
Hobby & DIY>Vehicles
IP Report

Print Profile(2)

All
P1S
P1P
H2D Pro
X1 Carbon
H2C
A1 mini
X1E
H2S
H2D
A1
X1
P2S
X2D
A2L
0.4 nozzle, 0.28mm layer, 2 walls, 15% infill
0.4 nozzle, 0.28mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
4.1(21)
0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill
0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
4.5(13)
Open in Bambu Studio
Boost
194
553
60
15
686
420
Released 

Bill of Materials

Bambu Filaments
Select all
Matte Charcoal (11101) / Refill / 1kg
PLA Matte
x1

Description

Fanatec CSL DD Cable Cover.

 

CSL DD have weak connector on back, which have tendency to easly breaking.

 

This element is useful if you are moving your base and don't want to break its cables.

Boost Me (for free)

Boost me for new, similar models. You can also suggest ideas or improvements that I can implement

 

Checkout my profile for more models: https://makerworld.com/en/@AngryPearl


 

fanatec
csl
dd
cover
cable

Comment & Rating (60)

(0/1000)
@siffonen
Boosted
Doesnt fit my csl dd, not wide enough. in pic one tab is broke and show how much wider this should be
The designer has replied
3
Reply
@AngryPearl
sorry to see that. Are you sure that you dont change size of this model before printing?
0
Reply
@siffonen
Boosted
Replying to @AngryPearl :
Didnt change anything, its perfect on the left side but just needs to be lil wider so that boths pins line up
2
Reply
@AngryPearl
Replying to @siffonen :
Can you measure your csl dd? I mean from side to side where this cover should be, on corners of base
0
Reply
@drago2544mail
Print Profile
0.4 nozzle, 0.28mm layer, 2 walls, 15% infill
Other Issues:the 2 tabs are too wide and at the wrong distance I will try to print a version with a distance of 110 mm and with 1mm less diameter
0
Reply
@user_226363861
@drago2544mail any luck with the reprint? Do you have a link by chance if so? Thank you!
0
Reply
@drago2544mail
Replying to @user_226363861 :
I never did it again
0
Reply
@user_226363861
Replying to @drago2544mail :
No problem! Thank you! I sliced off the pegs and used a 3M command strip with velcro as a fix
0
Reply
@user_3679334332
Print Profile
0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill
perfecto
profile
1
Reply
@korschi
Does it fit to DD Plus/Extreme? And can you make it for 0.4 nozzle? 🙈
The designer has replied
0
Reply
@AngryPearl
Sorry, I don't have DD Plus. I added 0.4 print profille
0
Reply
@korschi
Replying to @AngryPearl :
thank you 🙏🏼… I’ll try that.👍🏼😀
designer
1
Reply
@korschi
Replying to @korschi :
does not work with dd plus..and the pins are too thick
0
Reply
@StreetUsual
Print Profile
0.4 nozzle, 0.28mm layer, 2 walls, 15% infill
Other Issues:passt leider nicht
0
Reply
@Stmpp
Print Profile
0.4 nozzle, 0.28mm layer, 2 walls, 15% infill
0
Reply
@user_2373131605
Print Profile
0.4 nozzle, 0.28mm layer, 2 walls, 15% infill
did not work with my base
The profile uploader has replied
Show original
0
Reply
@AngryPearl
I dont have newest base, maybe it changed a bit. For me and lot of other users it is good. Also maybe its problem with your filament, some are more expandable after print, and this part have quite tight fit. Please consider change ratings, it means a lot for me
(Edited)
0
Reply
@user_2373131605
Replying to @AngryPearl :
I think the probleme is on the 0.4nozel because the peaple who work is only 0.6nozel.
0
Reply
@bmwilli13
Pins need to be a hair smaller.
The designer has replied
0
Reply
@AngryPearl
it depends on your filament, I tried couple kinds of mine spools and it was ok. I do it on purpose this tight
0
Reply
@user_370250451
have the same issue, have you tried scaling it down?
0
Reply
@MW00
waste of filament doesn't work
The designer has replied
0
Reply
@AngryPearl
Please tell what doesn't work, maybe I can improve something
0
Reply
@user_495281674
Printed and assembled, the pin spacings and diameters could be slightly adjusted, but a little adaptation suffices for a good fit. Excellent work
Show original
designer
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

A1 side drag chain, cable chain
A1 side drag chain, cable chain
Kar Fai
41.1 k
16.4 k
A1 Hotend Cable Chain (Updated)
A1 Hotend Cable Chain (Updated)
Moskk83
24.4 k
8.8 k
A1/A1 mini Cable elastic conduit
A1/A1 mini Cable elastic conduit
ShapeX
96.3 k
15.8 k
Fanatec CSL DD Cover
Fanatec CSL DD Cover
Leon
20
11