Drybox holder by Brodde1337

Brodde1337

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

(P1S & X1C 105mm) 0.2mm layer, 3 walls, 30% infill

Designer

1.8 h

1 plate

4.9(7)

Open in Bambu Studio

Boost

105

Released

Description

Drybox Holder: a simple yet effective solution designed to attach filament dryboxes securely to the side of your printer (and hold your build plates). Its hook-based design is specifically made to fit in the top panel gap or on the frame. For added stability and vibration reduction, it's recommended to place felt pads or TPU gaskets between the holder and the printer. While initially tested on the P1S, it may also be compatible with the X1C model. I found the dimensions of the P1Ps on the internet, so I highly recommend printing the gap test first. Make sure the width of your drybox corresponds with the version you pick.

I don't recommend anything less than 3 walls and 30% infill as the holder needs some strength.

The holder used in the photos is the “P1S & X1C (105mm)” and the box is the “eSUN eBOX” that I've painted matt black.

If some dimensions are incorrect just let me know and I will fix it.

Comment & Rating (12)

@gbomacfly

Print Profile

(P1S & X1C 105mm) 0.2mm layer, 3 walls, 30% infill

Works perfect with my Creality Space Pi. Thanks!

@user_390219545

Print Profile

(P1S & X1C 105mm) 0.2mm layer, 3 walls, 30% infill

had some extra PET-G so modified the profile to print it. came out great. thanks for this design.

@Purr_geandPrint

You wrote "Make sure the width of your drybox corresponds with the version you pick" you got more versions? I have the Gratkit Firefly dryer, so I'm asking about. Thanks in advance ;)

The designer has replied

@user_528826265

Hey there, if you check out the raw model files, you'll see examples like "P1S & X1C (105mm)". That "105mm" refers to the maximum width a drybox can have and still fit. And if no one seems to be the right one for your drybox, you could always remix one with the .step file.

(Edited)

@Purr_geandPrint

I tried to print only the hook to the printer, to see if it’s compatible with my led riser, and it is working perfectly. Will measure the firefly today and test it. have to check the maximum weight too, but I think pet-g would do. Will update the progress, in the mean time thanks again.

@user_528826265

Replying to @Purr_geandPrint :

I'm glad to hear it fits. Looking forward to the results!